Search for the product you are looking for
Motor Test Chamber

Motor Test Chamber

Product Introduction
Motor test chamber is aviation, automotive, home appliances, scientific research and other fields of essential test equipment for testing and determining electrical, electronic and other products and materials for high temperature, low temperature, alternating humidity and heat or constant test temperature environment after the change of parameters and performance.

Service Hotline

4000-662-888
Product Features
Product Parameter
Model Studio Size  (D*W*H)mm Dimension(D*W*H)mm
LRHS-101C-LJS 450×450×500 1160×1000×1610
LRHS-225C-LJS 500×600×750 1210×1150×1870
LRHS-504C-LJS 700×800×900 1260×1340×2070
LRHS-800C-LJS 800×1000×1000 1370×1550×2170
LRHS-1000C-LJS 1000×1000×1000 1560×1550×2170
temperature range A:-20℃~150℃      B:-40℃~150℃
C:-60℃~150℃      D:-70℃~150℃
Temperature uniformity ≤2℃ (at no load)
Temperature fluctuation ±0.5℃ (at no load)
Time Setting Range 1~60000M
Humidity range 20%~98% RH
Humidity uniformity +2% -3% RH
Humidity fluctuation ±2%
heating speed 1.0~3.0℃/min
cooling rate 0.7~1.0℃/min
test hole Mounted on the left side of the machine for use with external test power or signal cables
viewing window 210 x 275mm or 395 x 395mm (effective field of view)
Outer case material High quality A3 steel plate electrostatic spraying
Inner box material Imported high-grade stainless steel SUS304
Insulation material Rigid polyurethane foam + fiberglass
Temperature Controller Imported “UEC” brand temperature and humidity meter
temperature sensor PT100 platinum resistance temperature measurement body
Cooling method Single or double cascade refrigeration
Compressor Taikang, France
standard configuration Wet bulb gauze, sample holder
security protection Compressor overpressure overload, fan motor overheating, leakage protection
Over-temperature, under-phase/reverse-phase, test timing, overload and short-circuit protection
Supply Voltage AC380V±10% 50Hz
Power consumption (A)3.5kW/4.0kW/6.0kW/8.0kW/9.0kW
(B)4.0kW/4.5kW/7.5kW/9.0kW/10.5kW
(C)4.5kW/6.5kW/9.0kW/13.0kW/13.0kW
operating environment 5℃~+28℃ ≤85% RH
Note:
1、the test data are used in the ambient temperature of 25 ℃ and well ventilated conditions measured
2、Can be customized according to the specific requirements of the user non-standard motor test chamber etc
3、This technical information, subject to change without notice
Product Recommendation
Industry News
The UV aging test chamber is one of the aging test chamber products. What are its primary uses and functions? Today, we will share some insights.
During the operation of your high/low-temperature humidity test chamber, moisture can accumulate due to temperature fluctuations. To prevent this from affecting test results, it's essential to maintain the dryness of the equipment.
The sand and dust test chamber is used to evaluate the sealing performance of factory-produced products by simulating the erosion caused by natural wind and sand climates.