Sunlight Simulation Test Chamber-Linpin Instruments

Product Parameter

Model	Studio Size (DWH)mm	Dimension（DWH）mm
LRHS-1584B-SN	1200×1100×1200	2150×1340×2750

irradiated area	1000mm×1000mm
radiation intensity	≥1000W/m2(55W/m2~1200W/m2 program classification)
Irradiance deviation	≤±10%(at a distance of not less than 0.76 m from the radiation lamp)
Power value of irradiation intensity	55W/m² ~1120W/m²（adjustable)
Distance from anticondensation filter system to sample	450～1150mm(Distance adjustable)
temperature range	-40℃～+100℃(without light)、-20℃～+100℃(with light)
Temperature uniformity	≤2.0℃ (at no load)
Temperature fluctuation	≤±0.5℃(without light) 、≤±1℃(with light)
heating rate	-40℃～+100℃，average rate 3℃/min
cooling rate	+100℃～-40℃，average rate 3℃/min
Dew point temperature range	+5°C to 87°C (without light), +5°C to +74°C (with light);
Outer case material	Double-sided galvanized high-quality cold-rolled steel plate, surface electrostatic spray treatment, plate thickness t=1.5mm
Inner box material	Stainless steel plate (SUS304-CP 2B ground), plate thickness t=1.0mm
Insulation material	120mm rigid polyurethane foam insulation layer
Controller	Taiwan “Wyland” temperature and humidity controller (7.0 inches, high-definition true color “TFT” LCD touch screen)
refrigeration system	France “Taikang” hermetic air-cooled compressor refrigeration method
temperature sensor	High Accuracy Pt100 Platinum Resistance Temperature Sensors
Humidity Sensor	Highly accurate Vaisala capacitive humidity sensors from Finland
lighting system	German original imported “OSRAM” short arc xenon lamps
radiation meter	Sunlight intensity meter imported from Japan
security protection	Compressor low pressure/overload/high pressure alarm, hydrogen/oxygen/soot concentration alarm, fan overload, system abnormality alarm, emergency stop switch, water shortage, short-circuit, phase shortage, over-temperature and other protections
Supply Voltage	AC380V±10% 50Hz
Power	24.5kW

Industry News

What are the methods for determining the results of a salt spray test chamber?

A salt spray test chamber is a device used to evaluate the corrosion resistance of product surfaces, widely applied in material research across various industries and academic institutions.

Q&A: Troubleshooting Common Issues with High and Low Temperature Test Chambers

Previously, we introduced some common problems with high and low temperature test chambers. Today, we will discuss the issue of slow cooling in the test equipment, which may be caused by malfunctions in the refrigeration system.

Technical Analysis of Simulated-Environment Test Procedures in Rain Test Chambers –– A Comprehensive Overview Based on IEC 60068-2-18, ISO 20653 and Major OEM Standards

With the continuous tightening of ingress-protection requirements in automotive electronics, low-voltage power distribution and photovoltaic industries, repeatable, quantifiable and traceable artificial-rain testing has replaced the traditional “splash-and-inspect” approach and become the core means of verifying sealing performance.