Electrical Component Aging Chamber-Linpin Instruments

Product Parameter

Model	Studio Size (DWH)mm	Dimension（DWH）mm
LRHS-1000-LG	1000×1000×1000	Subject to contractual three-view
LRHS-2000-LG	1000×2000×1000
LRHS-4000-LG	2000×2000×1000
LRHS-6000-LG	2000×3000×1000

temperature range	RT+10℃～200℃/RT+10℃～300℃
Temperature uniformity	≤2℃ (at no load)
Temperature fluctuation	±0.5℃ (at no load)
heating speed	1.0～3.0℃/min
Full temperature rise speed	<50 minutes (at RT+10 to 200°C)
Time Setting Range	1～60000M
viewing window	210 x 275mm or 395 x 395mm (effective field of view)
test hole	Mounted on the left side of the machine for use with external test power or signal cables
Outer case material	High quality A3 steel plate electrostatic spraying
Inner box material	Imported high-grade stainless steel SUS304
Insulation material	Rigid polyurethane foam + fiberglass
Temperature Controller	Imported “UEC” brand temperature and humidity meter
temperature sensor	PT100 platinum resistance temperature measurement body
alternating current contactor	Schneider France
overtemperature protector	Korea RAINBOW
Miniature Circuit Breaker	Schneider France
standard configuration		sample holder
security protection		Over-temperature, fan motor overheating, equipment timing Machine under-phase/reverse-phase, leakage protection, overload and short-circuit protection
Supply Voltage		AC380V±10% 5Hz
Power consumption		9.5kW	14.0kW	18.5kW	22.0kW
operating environment		5℃～＋28℃ ≤85% RH
Note: 1、the test data are used in the ambient temperature of 25 ℃ and well ventilated conditions measured 2、Can be customized according to the specific requirements of the user non-standard electrical component aging chamber etc 3、This technical information, subject to change without notice

Industry News

Which Type of Salt Spray Test is Suitable for Your Product?

The salt spray test chamber is an essential testing device for evaluating the corrosion resistance of various materials. Depending on the material or product being tested, key parameters such as temperature, humidity, pH value, and solvent composition may vary.

Guidelines for Selecting Humidity Test Methods in High-Low Temperature Cyclic Humidity Chambers —A Systematic Decision Based on Specimen Characteristics and Failure Mechanisms

In generic reliability standards such as GB/T 2423, IEC 60068 and MIL-STD-810, “damp heat” is treated as an independent climatic stress. The goal is not merely to verify moisture resistance, but to accelerate and expose failure modes triggered by water adsorption, condensation, “breathing” and electrochemical migration.

Thermal Shock Test Chambers: A Comprehensive Review of Principles, Applications, and Technical Characteristics

The thermal shock test chamber is a cornerstone of environmental-reliability testing. Within tens of seconds it transfers specimens between extreme high- and low-temperature zones, revealing mechanical stress, electrical degradation, and chemical instability induced by rapid thermal expansion and contraction.