Search for the product you are looking for
Salt spray box for automotive parts

Salt spray box for automotive parts

Product Introduction
Salt spray box for automotive parts is suitable for components or equipment intended to withstand the salt atmosphere, the test is based on its tolerance program to select the appropriate level of severity, the test steps are generally wet, salt spray, dry and so on.

Service Hotline

4000-662-888
Product Features
Product Parameter
Model Studio Size  (D*W*H)mm Dimension(D*W*H)mm
LRHS-108-RFHY 450×600×400 Subject to contractual three-view
LRHS-270-RFHY 600×900×500
LRHS-412-RFHY 750×1100×500
LRHS-663-RFHY 850×1300×600
LRHS-816-RFHY 850×1300×600
LRHS-1080-RFHY 900×2000×600
temperature range RT+5℃~60℃
Humidity range 30%~98% RH
Saturated drum temperature RT+10℃~70℃
Temperature uniformity ≤2℃ (at no load)
Temperature fluctuation ±0.5℃ (at no load)
Salt spray deposition 1~2ml/80 cm².h(16-hour average)
heating rate 0.5℃~1.5℃/min
cooling rate 0.5℃~1.0℃/min
Compressed air pressure 2.00±0.01(kg/cm²)
Spraying method Continuous/periodic selectable
Specimen holder angle 20±5°
Test Methods NSS test AASS test CASS test
Case Material PP reinforced rigid plastic sheet or 316 stainless steel
Lid Material PP reinforced rigid plastic sheet or 316 stainless steel
Air-saturated drums Imported high-grade stainless steel SUS304
Pressurized Air Hose Material High quality rubber hose
Other pipelines Thickened Fluorosilicone Rubber Tubing
Temperature Controller Imported “UEC” brand temperature and humidity meter
Dehumidification and cooling Single or double cascade refrigeration
temperature sensor PT100 platinum resistance temperature measurement body
Compressor Taikang, France
heater Titanium Heating Tube
interrupter Schneider miniature circuit breakers (to prevent short circuits in control circuits)
standard configuration V-shaped sample holders, round rods, nozzles, funnels, metering cylinders, mist evacuation tubes
security protection Over-temperature, overall equipment under-phase/reverse-phase, test timing, rapid fogging instructions
The end of the test, low water level protection, leakage, short circuit, compressor overpressure overload
Supply Voltage AC380V±10% 50Hz
Power consumption 8.5kW/10.0kW/12.0kW/13.5kW/15.0kW/17.5kW
operating environment 5℃~+28℃ ≤85% RH
Note:
1、the test data are used in the ambient temperature of 25 ℃ and well ventilated conditions measured
2、Can be customized according to the specific requirements of the user non-standard salt spray box for automotive parts etc
3、This technical information, subject to change without notice

 

Product Recommendation
Industry News
In the era of surging technological waves, every product is like a brave "explorer" venturing into the unknown, and it must demonstrate reliable performance in various extreme environments. The high and low temperature and low pressure test chamber is like a magical "environmental wizard.
If the temperature and humidity test chamber is a powerful tool for evaluating product performance, then the operators are the ones who wield this tool—and a critical factor that directly influences test results.
A constant temperature and humidity test chamber consists of multiple components, and any malfunction can disrupt testing. Previously, we discussed troubleshooting methods for other issues. Today, we focus on expansion valve failures.
Telegram WhatsApp Facebook VK LinkedIn