Search for the product you are looking for
Rapid Temperature Change Test Chamber

Rapid Temperature Change Test Chamber

Product Introduction
Rapid temperature change test chamber is aviation, automotive, home appliances, scientific research and other fields of essential test equipment for testing and determining electrical, electronic and other products and materials for high temperature, low temperature, alternating humidity and heat or constant test temperature environment after the change of parameters and performance.

Service Hotline

4000-662-888
Product Features
Product Parameter
Model Workshop size(D*W*H) mm External Dimension(D*W*H)mm
LRHS-101B(r5)-LJ 450×450×500 1160×1000×1610
LRHS-225B(r5)-LJ 500×600×750 1210×1150×1870
LRHS-504B(r5)-LJ 700×800×900 1260×1340×2070
LRHS-800B(r5)-LJ 800×1000×1000 1370×1550×2170
LRHS-1000B(r5)-LJ 1000×1000×1000 1560×1550×2170
temperature range A:-20℃~150℃ B:-40℃~150℃ C:-60℃~150℃
Temperature uniformity ≤2℃ (at no load)
Temperature fluctuation ±0.5℃(at no load)
heating rate -40℃~80℃ Linearity 5℃/min(at no load)
cooling rate 80℃~-40℃ Linear 5℃/min(at no load)
Time Setting Range 1~60000M
test hole Mounted on the left side of the machine for use with external test power or signal cables
viewing window 210 x 275mm or 395 x 395mm (effective field of view)
Outer case material High quality A3 steel plate electrostatic spraying
Inner box material Imported high-grade stainless steel SUS304
Insulation material Rigid polyurethane foam + fiberglass
Temperature Controller Imported “UEC” brand temperature meter
temperature sensor PT100 platinum resistance temperature measurement body
Cooling method Two-machine cascade refrigeration
Compressor Tycon (France) / BITZER (Germany)
standard configuration Sample racks, 2 tiers, with condensate catch pan and drain out of the box
security protection Compressor overpressure overload, fan motor overheating, the whole machine under phase / reverse phase
Equipment timing, over-temperature, leakage protection, overload and short-circuit protection
Supply Voltage AC380V±10% 50Hz
operating environment 5℃~+28℃ ≤85% RH
Note:
1、the above data are in the use of ambient temperature of 25 ℃ and well ventilated conditions measured
2、Can be customized according to the user’s specific test requirements non-standard rapid temperature change test chamber and other test chambers
3、This technical information, subject to change without notice

 

Product Recommendation
Industry News
The constant temperature and humidity test chamber is widely used in many industries. To reduce the failure rate and accident rate during use
The rain test chamber is a testing instrument used to evaluate the effectiveness of water resistance.
Proper protective measures are essential when operating a UV aging test chamber because it uses UV lamps, which can cause eye damage if not handled correctly. To prevent such risks, appropriate precautions must be taken.