Search for the product you are looking for
Constant Temperature And Humidity Test Chamber

Constant Temperature And Humidity Test Chamber

Product Introduction
Constant temperature and humidity test chamber is aviation, automotive, home appliances, scientific research and other fields of essential test equipment for testing and determining electrical, electronic and other products and materials for high temperature, low temperature, alternating humidity and heat or constant test of the temperature environment after the change of parameters and performance.

Service Hotline

4000-662-888
Product Features
Product Parameter
Model Studio Size(D*W*H)mm Dimension(D*W*H)mm
LRHS-101-LH 450×450×500 1160×1000×1610
LRHS-225-LH 500×600×750 1210×1150×1870
LRHS-504-LH 700×800×900 1260×1340×2070
LRHS-800-LH 800×1000×1000 1370×1550×2170
LRHS-1000-LH 1000×1000×1000 1560×1550×2170
Temperature range 0℃~150℃
Temperature uniformity ≤2℃(unladen)
Temperature fluctuation ±0.5℃(unladen)
Humidity range 20%~98% RH
Humidity uniformity +2% -3% RH
Humidity fluctuation ±2%
Heating rate 1.0~3.0℃/min
Cooling rate 0.7~1.0℃/min
Time Setting Range 1~60000M
Test hole Mounted on the left side of the machine for use with external test power or signal cables
Viewing window 210×275mm / 395×395mm(effective vision)
Outer case material High quality A3 steel plate electrostatic spraying
Inner box material Imported high-grade stainless steel SUS304
Insulation material Rigid polyurethane foam + glass fiber
Temperature Controller Adopting Japan “UMC” brand temperature meter
Temperature Sensor PT100 Platinum resistance thermometer
Cooling method Stand-alone cooling
Compressor Tecumseh, France
Standard configuration 1 roll of wet bulb gauze, 2 sample racks, with condensate catch pan and drain out of the box
Safety Compressor overpressure overload, fan motor overheating, the whole machine phase / reverse phase, over-temperature, the whole equipment timing, leakage protection, overload and short circuit protection.
Supply Voltage AC380V±10% 50Hz
Power 4.0kW/5.5kW/8.5kW/11.5kW/11.5kW
Operating environment 5℃~+28℃ ≤85% RH
Note:
1、the above data are in the use of ambient temperature of 25 ℃ and well-ventilated conditions measured
2、Can be customized according to the user’s specific test requirements of non-standard constant temperature and humidity test chamber etc.
3、This technical information, subject to change without notice

 

Product Recommendation
Industry News
A UV aging test chamber is used to evaluate the weather resistance of various materials under ultraviolet (UV) light conditions.
When a temperature cycling test chamber malfunctions, how should you troubleshoot it? Have you identified the correct diagnostic approach? Mastering the right methods can help quickly locate the issue and restore functionality more efficiently.
Safety is a fundamental requirement for any equipment. When operating a thermal shock test chamber, certain safety precautions must be observed. Below is a brief introduction to key safety considerations.