Photovoltaic Dustproof Test Chamber-Linpin Instruments

Product Parameter

Studio Size (DWH)mm	1400×2400×900（DWH）mm
Dimension（DWH）mm	6000×9650×3700（DWH）mm
temperature range	23℃～70℃
temperature deviation	≤±2℃
Humidity range	＜30%RH
Dust blowing air speed	1.5～10 m/s
Sand blowing wind speed	18.0～30.0 m/s
Blowing Dust Concentration	3.0～17.6 g/m³ (10.7 ± 7 g/m³)
sandblast concentration	0.18 + 0.2 g/m³；1.1 ± 0.3 g/m³；2.2 ± 0.5 g/m³
Test dust	quartz dust
Sand Size	≤ 149 μm to pass through a 150 μm diameter mesh.
viewing window	800×500mm(Effective vision)
Outer case material	High quality A3 steel plate electrostatic spraying
Inner box material	Imported high-grade stainless steel SUS304
Temperature Controller	Imported “UEC” brand temperature and humidity meter
Temperature:	5℃～＋35℃(Average temperature over 24 hours ≤ 28°C)
Relative Humidity:	≤85%RH
Barometric pressure:	86kPa～106kPa
Supply Voltage		AC380V±10% 60Hz
Power		Approx. 45.0kW
Note: 1、 the above data are in the use of ambient temperature of 25 ℃ and well ventilated conditions measured 2、Can be customized according to the specific requirements of the user non-standard photovoltaic dustproof test chamber etc 3、This technical information, if there is any change without prior notice

Industry News

Step-by-Step Guide to Understanding the Operation of a Salt Spray Test Chamber

The entire testing process of a salt spray test chamber is relatively straightforward, and with technological advancements, the operation has become even simpler and more intelligent.

The Trial Box of the Technological Era—Low-Temperature Alternating Humidity and Heat Test Chamber

What are the functions of the Linpin High-Low Temperature Alternating Humidity and Heat Test Chamber? Under high-temperature conditions, it can test whether different products and materials become softened, whether their efficiency is reduced, or how they behave in high-temperature or humid and hot environments.

The Necessity of Lightning Protection and Performance Advantages of Low-Temperature Test Chambers

Low-temperature test chambers are primarily used to evaluate the storage capabilities and environmental adaptability of products and materials from industries such as electronics, electrical engineering, automotive, and home appliances under extremely low-temperature climatic conditions.