Photovoltaic Dustproof Test Chamber-Linpin Instruments

Product Parameter

Studio Size (DWH)mm	1400×2400×900（DWH）mm
Dimension（DWH）mm	6000×9650×3700（DWH）mm
temperature range	23℃～70℃
temperature deviation	≤±2℃
Humidity range	＜30%RH
Dust blowing air speed	1.5～10 m/s
Sand blowing wind speed	18.0～30.0 m/s
Blowing Dust Concentration	3.0～17.6 g/m³ (10.7 ± 7 g/m³)
sandblast concentration	0.18 + 0.2 g/m³；1.1 ± 0.3 g/m³；2.2 ± 0.5 g/m³
Test dust	quartz dust
Sand Size	≤ 149 μm to pass through a 150 μm diameter mesh.
viewing window	800×500mm(Effective vision)
Outer case material	High quality A3 steel plate electrostatic spraying
Inner box material	Imported high-grade stainless steel SUS304
Temperature Controller	Imported “UEC” brand temperature and humidity meter
Temperature:	5℃～＋35℃(Average temperature over 24 hours ≤ 28°C)
Relative Humidity:	≤85%RH
Barometric pressure:	86kPa～106kPa
Supply Voltage		AC380V±10% 60Hz
Power		Approx. 45.0kW
Note: 1、 the above data are in the use of ambient temperature of 25 ℃ and well ventilated conditions measured 2、Can be customized according to the specific requirements of the user non-standard photovoltaic dustproof test chamber etc 3、This technical information, if there is any change without prior notice

Industry News

Let’s talk about the reasons why a high-low temperature and humidity test chamber trips immediately upon startup

I wonder if anyone has encountered the phenomenon where the equipment trips or trips the circuit breaker as soon as it is started during the use of a high-low temperature and humidity test chamber. Why does this happen?

Expert Tips: How to Deal with Nozzle Clogging in a Salt Spray Test Chamber

If your salt spray test chamber experiences spray failure, the issue may be a clogged nozzle. So, how should you handle nozzle clogging? Here’s a clever trick from our experts—a simple guide on how to resolve nozzle blockages in testing equipment.

The Necessity of Lightning Protection and Performance Advantages of Low-Temperature Test Chambers

Low-temperature test chambers are primarily used to evaluate the storage capabilities and environmental adaptability of products and materials from industries such as electronics, electrical engineering, automotive, and home appliances under extremely low-temperature climatic conditions.