Search for the product you are looking for
Condensation Water Test Chamber

Condensation Water Test Chamber

Product Introduction
Condensation water test chamber is Lin frequency instrument according to DIN EN ISO6270-2, DIN 50018 and other corresponding standards for the manufacture of environmental test equipment, equipment can be 100% humidity test, while low temperature, high temperature, humidity in one of the integrated test, applied to aerospace, quality inspection colleges and universities, new materials, automotive and electronics industries.

Service Hotline

4000-662-888
Product Features
Product Parameter
Model Studio Size  (D*W*H)mm Dimension(D*W*H)mm
LRHS-101-LN 450×450×500 650×950×1500
LRHS-225-LN 500×600×750 700×1100×1550
LRHS-500-LN 700×800×900 900×1300×1600
LRHS-800-LN 800×1000×1000 1000×1500×1700
LRHS-1000-LN 1000×1000×1000 1480×1170×1720
temperature range 25℃~45℃
Humidity range 100% RH
Humidity Deviation +2、-3% RH
heating speed The air temperature inside the box reaches 40℃ for less than 90 minutes.
Time Setting Range 1~60000M
User Environmental Requirements Ambient temperature must be controlled at 23±5℃, humidity ≤75%RH or less
using a viewing window 210 x 275mm or 395 x 395mm (effective field of view)
Outer case material High quality A3 steel plate electrostatic spraying
Inner box material Imported high-grade stainless steel SUS304
Insulation material Rigid polyurethane foam + fiberglass
Temperature and humidity controller Imported “UEC” brand temperature and humidity meter
overtemperature protector Korea RAINBOW
temperature sensor PT100 platinum resistance temperature measurement body
standard configuration 1 set of magnetic wipe, 1 set of sample holder
security protection Over-temperature, fan motor overheating, overall equipment phase failure/reverse phase
Test timing, leakage protection, overload and short-circuit protection
Supply Voltage AC220V±10% 50±0.5Hz/AC380V±10% 50±0.5Hz
Power 2.5kW/3.5kW/4.0kW/4.8kW/4.8kW
Note:
1、the above data are in the use of ambient temperature of 25 ℃ and well ventilated conditions measured
2、Can be customized according to the specific requirements of the user non-standard condensation test chamber etc3、This technical information, subject to change without notice

 

Product Recommendation
Industry News
Given that temperature and humidity alternating test chambers are expensive, it is crucial to keep certain precautions in mind when using the equipment to ensure better protection and maximize its value.
An aging test chamber does not refer to a single device but encompasses various testing methods, including xenon lamp aging tests, UV aging tests, high-temperature aging tests, air-exchange aging tests, and salt spray corrosion aging tests.
A UV aging test chamber is a device that artificially simulates the UV environment and high-temperature conditions found in nature to conduct light-fastness tests on non-metallic products and obtain their light-fastness results.