EN
中文 Pусский Tiếng Việt ภาษาไทย پاکستانی زبان
Linpin Instruments EN
Search for the product you are looking for
Hot search
Constant Temperature And Humidity Test Chamber Walk-in High and Low Temperature Test Chamber
Press Enter to search
HAST Test Chamber

HAST Test Chamber

Product Introduction
The purpose of HAST test chamber, PCT test chamber, unsaturated accelerated life test chamber is to improve the environmental stress (e.g., temperature) and the working stress (voltage applied to the product, load . etc.), accelerate the test process, shorten the product or system life test time, used to investigate and analyze when the electronic components, and mechanical parts of the wear and life of the problem, the service life of the failure distribution function in what shape, as well as to analyze the failure rate.

Service Hotline

4000-662-888
Location：Home > Products > HAST Test Chamber
Product Features
Product Parameter
Model Studio Size  (D*W*H)mm Dimension（D*W*H）mm
LRHS-45Z-HAST ∅450×500 约1600×950×1600
temperature range 105℃～143℃
Humidity range 75%RH ～100%RH
Pressure range 0.02 M pa to 0.196 M pa (gauge pressure)
0.2kg/cm2 to 1.96kg/cm2(gauge pressure)
control accuracy Temperature: ±0.3°C / Humidity: ±3.0%.
heating time Room temperature～130℃/85%RH about 100 minutes
Outer case material SUS#304 high tensile stainless steel plate, and through the multi-layer film free layer surface treatment
Inner box material SUS#316 Heat resistant and cold resistant stainless steel plate
Insulation material High Density Glass Wool
heaters Electric heater made of 316 stainless steel
Heating systems Electric heater made of 316 stainless steel
security protection Over-temperature, fan motor overheating, leakage protection, overall equipment timing and short-circuit protection
Supply Voltage AC220V±10% 50±0.5Hz
operating environment 5℃～＋35℃ ≤85% RH
Note:
1、the above data are measured in the use of ambient temperature of 25 ℃ and well-ventilated conditions
2、Can be customized according to the specific requirements of the user non-standard HAST test chamber etc
3、This technical information is subject to change without prior notice.

 

Product Recommendation
Desktop Tester
Desktop Tester
Photovoltaic wet freezing test chamber
Photovoltaic wet freezing test chamber
Air-exchange Aging Test Chamber
Air-exchange Aging Test Chamber
UV Aging Simulation Test Chamber
UV Aging Simulation Test Chamber
Wind power rotor test chamber
Wind power rotor test chamber
Industry News
Ozone Aging Test Chamber: The “Detection Master” of Material Aging Performance
In the field of material research and production, the ozone aging test chamber plays a crucial role. It acts like a professional "detection master," precisely simulating an ozone environment to help people gain a deep understanding of the aging performance of materials under specific conditions.
Ozone Aging Test Chamber: The “Detection Master” of Material Aging Performance
Is the automatic water replenishment function necessary for high and low temperature humidity test chambers?
If the high and low temperature humidity test chamber is used frequently and for a long time, the water in the equipment's water tank may not be sufficient to complete the test.
Is the automatic water replenishment function necessary for high and low temperature humidity test chambers?
Comparison of Two Cooling Methods for Constant Temperature and Humidity Test Chambers
Cooling is a critical aspect of constant temperature and humidity test chambers. The two most common cooling methods are water-cooled (chilled water) and air-cooled. Each has its own advantages and disadvantages.
Comparison of Two Cooling Methods for Constant Temperature and Humidity Test Chambers
Telegram WhatsApp Facebook VK LinkedIn
Follow WeChat

Copyright © 2025 Shanghai Linpin Instrument Co., Ltd Copyright

 | ICP Number：Shanghai ICP Record No. 12029585-7

 | Sitemap