Search for the product you are looking for
Ozone Aging Test Chamber

Ozone Aging Test Chamber

Product Introduction
Ozone aging test chamber can be used for rubber products such as vulcanized rubber, thermoplastic rubber, cable insulation sheaths and other products, in dynamic tensile deformation, exposed to closed no light containing a constant concentration of ozone air and constant temperature of the test chamber, according to a predetermined time on the specimen for testing, from the surface of the specimen cracks occurring or other properties of the degree of change, in order to assess the rubber's ozone resistance Aging performance.

Service Hotline

4000-662-888
Product Features
Product Parameter
Model Studio Size  (D*W*H)mm Dimension(D*W*H)mm
LRHS-101-NDO₃ 450×450×500 1160×1000×1800
LRHS-225-NDO₃ 500×600×750 1220×1150×2040
LRHS-504-NDO₃ 700×800×900 1520×1250×2200
LRHS-800-NDO₃ 800×1000×1000 1520×1540×2300
LRHS-1000-NDO₃ 1000×1000×1000 1720×1540×2300
temperature range 25℃~65℃(adjustable)
Humidity range 40~98%RH
Temperature uniformity ≤2℃(at no load)
Temperature fluctuation ±0.5℃(at no load)
temperature deviation ±2℃
Humidity Deviation ±5% RH at ≤75% RH, +2, -3% RH at >75% RH
ozone concentration 50~1000pphm or 50~300ppm
gas velocity 8~16mm/s
Ozone concentration deviation ≤±10%
Rotation speed of the sample frame 1~3r/min(adjustable)
Outer case material High quality A3 steel plate electrostatic spraying
Inner box material Imported high-grade stainless steel SUS304
Insulation material Rigid polyurethane foam + fiberglass
viewing window 210 x 275mm or 395 x 395mm (effective field of view)
Temperature and humidity controller 7.0-inch color touch screen of “Taiwan Weilun” and PLC module control of “Germany Siemens”.
Temperature and humidity sensors PT100 platinum resistance temperature measurement body
Ozone Sensor ECO USA
Cooling method stand-alone refrigeration
Compressor Taikang, France
Refrigerant R404A (environmentally friendly) (ozone depletion index 0)
standard configuration Carousel type sample holder 1 set
security protection Compressor overpressure overload, heating tube dry burning, water supply abnormality, fan motor overheating, equipment over temperature
Overall equipment under phase/reverse phase, test timing, leakage protection, automatic shutdown after the fault alarm and other protections
Supply Voltage AC380V±10% 50Hz
Power 4.0kW/5.5kW/7.0kW/9.0kW/11.5kW
operating environment 5℃~+28℃ ≤85% RH
Note. 1:
1、“LRHS-101-NDO₃” for dynamic ozone aging test chamber, static ozone aging test model “LRHS-101-NO₃”.
2、Can be customized according to the user’s specific test requirements of non-standard.
3、This technical information, subject to change without notice

 

Product Recommendation
Industry News
The safety of low-temperature test chambers during operation is of utmost importance. Not only must environmental safety measures be in place, but proper operational protocols must also be followed.
In the field of quality inspection and reliability testing, constant temperature and humidity test chambers and high and low temperature test chambers are two commonly used environmental simulation devices, each with unique functions and application scenarios.
Given that temperature and humidity alternating test chambers are expensive, it is crucial to keep certain precautions in mind when using the equipment to ensure better protection and maximize its value.
Telegram WhatsApp Facebook VK LinkedIn