Multi-function Salt Spray Corrosion Tester-Linpin Instruments

Product Parameter

Model	Studio Size (DWH)mm	Dimension（DWH）mm
LRHS-108-RFHY	450×600×400	Subject to contractual three-view
LRHS-270-RFHY	600×900×500
LRHS-412-RFHY	750×1100×500
LRHS-663-RFHY	850×1300×600
LRHS-816-RFHY	850×1600×600
LRHS-1080-RFHY	900×2000×600
temperature range	-30℃～80℃
Humidity range	30%～98% RH
Saturated drum temperature	RT+10℃～70℃
Temperature uniformity	≤2℃
Temperature fluctuation	±0.5℃
Salt spray deposition	1～2ml/80 cm².h(16-hour average)
heating rate	0.5℃～1.5℃/min
cooling rate	0.5℃～1.0℃/min
Compressed air pressure	2.00±0.01（kg/cm²）
Spraying method	Continuous/periodic selectable
Specimen holder angle	20±5°
Test Methods	NSS test AASS test CASS test
Case Material	PP reinforced rigid plastic sheet or 316 stainless steel
Lid Material	PP reinforced rigid plastic sheet or 316 stainless steel
Air-saturated drums	Imported high-grade stainless steel SUS304
Pressurized Air Hose Material	High quality rubber hose
Other pipelines	Thickened Fluorosilicone Rubber Tubing
Temperature Controller	Imported “UEC” brand temperature and humidity meter
Dehumidification and cooling	Single or double cascade refrigeration
Compressor	Taikang, France
temperature sensor	High Accuracy Pt100 Platinum Resistance Temperature Sensors
heater	Titanium Heating Tube
interrupter	Schneider miniature circuit breakers (to prevent short circuits in control circuits)
standard configuration	V-shaped sample holders, round rods, nozzles, funnels, metering cylinders, mist evacuation tubes
security protection	Over-temperature, under-phase/reverse-phase, test timer, fast fogging indication Low water level protection, leakage, short circuit, compressor overpressure overload, test end
Supply Voltage	AC380V±10% 50Hz
Power	8.5kW/10.0kW/12.0kW/13.5kW/15.0kW/17.5kW
operating environment	5℃～＋28℃ ≤85% RH
Note: 1、the test data are used in the ambient temperature of 25 ℃ and well ventilated conditions measured 2、Can be customized according to the specific requirements of the user non-standard multi-function salt spray corrosion tester etc 3、This technical information, subject to change without notice

Industry News

Choosing the Right Lamp for Your UV Aging Test Chamber

The lamps in a UV aging test chamber will degrade over prolonged use, and aging lamps need to be replaced promptly. So, how do you select the right lamp for the test chamber? Are there any tips for making the right choice? Today, we’ll share some useful tips for selecting UV aging test chamber lamps.

Analyzing Why High-Temperature Test Chambers Leak

Analyzing the causes of equipment failures in high-temperature test chambers can help resolve issues more quickly.

How to Enhance the Stability of Aging Test Chambers

Stability is crucial for the accuracy of test results in aging test chambers. Are there any methods to maintain and improve the stability of the chambers during use?