Box-type Flushing Test Chamber-Linpin Instruments

Product Parameter

Model		Studio Size (DWH)mm	Dimension（DWH）mm
LRHS-1000-JL		1000×1000×1000	1320×4500×2070

Spraying aperture	ø6.3mm与ø12.5mm
water jet pressure	30kpa与100kpa(reference value, subject to flow rate attainment)
water spray	12.5±0.625L/min～75±5L/min adjustable 20±1L/min～120±6L/min adjustable
Test time	Minimum 3min
Outer case material	High quality A3 steel plate electrostatic spraying
Inner box material	Imported high-grade stainless steel SUS304
Insulation material	Rigid polyurethane foam + fiberglass
rotary table	Countertop in (SUS304) stainless steel
Other Accessory Materials	All parts in contact with water are made of stainless steel or copper.
security protection		Test timing, leakage protection, short-circuit protection and automatic shutdown after fault alarms
Supply Voltage		AC220V±10% 50Hz
Power		2.5kW
operating environment		5℃～＋28℃ ≤85% RH
Note: 1、the above data are in the use of ambient temperature of 25 ℃ and well ventilated conditions measured 2、Can be customized according to the user’s specific requirements, such as non-standard test chamber 3、This technical information, if there is any change without prior notice

Industry News

Failure Mechanisms of Cooling Loss in Thermal Shock Test Chambers ——A Systematic Analysis Based on the Reverse Carnot Cycle

Thermal shock test chambers are indispensable in reliability qualification for electronics, aerospace, and automotive industries. Once the “no-cooling” fault occurs, the test sequence is immediately interrupted and secondary damage to the specimen may follow.

A Letter to Operators of Temperature and Humidity Test Chambers

If the temperature and humidity test chamber is a powerful tool for evaluating product performance, then the operators are the ones who wield this tool—and a critical factor that directly influences test results.

The “Forbidden List” of Thermal Shock Test Chambers: Which Materials Cannot Be Tested?

The thermal shock test chamber is truly a versatile tool in the field of material testing. It can simulate extreme environments where materials experience rapid alternations between extremely high and low temperatures within a short period.