Constant temperature aging room-Linpin Instruments

Product Parameter

Model	Studio Size (DWH)mm	Dimension（DWH）mm
LRHS-8M-LG	2000×2000×2000	Subject to contractual three-view
LRHS-15M-LG	2500×3000×2000
LRHS-30M-LG	3000×5000×2000
LRHS-60M-LG	5000×6000×2000

temperature range	RT+10℃～85℃/RT+10℃～150℃/ RT+10℃～200℃
Temperature uniformity	≤2℃ (at no load)
Temperature fluctuation	±0.5℃ (at no load)
Time Setting Range	1～60000M
heating rate	RT+10℃～85℃≤30min
Outer case material	High-quality library board, CNC finishing
Inner box material	Imported high-grade stainless steel SUS304
Insulation material	Rigid polyurethane foam + fiberglass
Temperature Controller	Imported “UEC” brand temperature and humidity meter
temperature sensor	PT100 platinum resistance temperature measurement body
overtemperature protector	Korea RAINBOW
Miniature Circuit Breaker	Schneider France
standard configuration		Emergency stop switch, three-color indicator light
security protection		Over-temperature, fan motor overheating, overall equipment phase failure/reverse phase Leakage protection, overall equipment timing, overload and short circuit protection
Supply Voltage		AC380V±10% 50Hz
Power consumption		15.0kW	20.5kW	28.0kW	35.0kW
operating environment		5℃～＋28℃ ≤85% RH
Note: 1、the test data are used in the ambient temperature of 25 ℃ and well ventilated conditions measured 2、Can be customized according to the specific requirements of the user non-standard constant temperature aging room etc 3、This technical information, subject to change without notice

Industry News

Cold and Hot Shock Test Chamber: Pre-Trial Cleaning of Test Specimens

The cold and hot shock test chamber is an effective device for detecting the performance of electronic components under rapidly changing temperature conditions. Many materials are tested using this equipment. To ensure the accuracy of the test results, it is necessary to clean the test specimens before the test chamber is operated.

What to Prepare Before Operating the Sand and Dust Test Chamber

To ensure that the sand and dust test chamber can quickly start the testing process, the preliminary preparations must be thorough.

White Paper on Rain-Test Chamber Installation Specification and Cross-Industry Testing Applications

With the continuous updating of GB/T 4208-2017, IEC 60529:2013, MIL-STD-810H and other domestic and international protection-class standards, “rain testing” has evolved from a simple “water-proof check” into a systematic evaluation covering sealing reliability, material weatherability, structural integrity, electronic compatibility and more.