Wind power rotor test chamber-Linpin Instruments

Product Parameter

Model	LRHS-6400A-LJS
Studio Size (DWH)mm	1600×2000×2000（DWH）mm
Dimension（DWH）mm	2450×2400×3120（DWH）mm
temperature range	0℃～40℃
Humidity range	10%～98% RH
Temperature uniformity	≤2℃ (at no load)
Humidity uniformity	+2% -3% RH (at no load)
Temperature fluctuation	±0.5℃ (at no load)
Humidity fluctuation	±2%RH (at no load)
temperature deviation	±2℃ (at no load)
Humidity Deviation	>75%RH ±2.5%RH <75%RH ±5%RH
cooling rate	1℃～3℃/min(average throughout)
heating speed	1℃～3℃/min(average throughout)
Time Setting Range	1～60000M
Power consumption	32.0kW
Outer case material	High-quality cold-rolled steel plate, surface plastic spraying treatment
Inner box material	Imported high-grade stainless steel SUS304
Insulation material	Rigid polyurethane foam + fiberglass
Temperature Controller	Imported “UEC” brand temperature and humidity meter
Supply Voltage	AC380V±10% 50Hz
Note: 1、the test data are used in the ambient temperature of 25 ℃ and well ventilated conditions measured 2、Can be customized according to the specific requirements of the user non-standard wind power rotor test chamber etc 3、This technical information, subject to change without notice

Industry News

How to Properly Calibrate Your Constant Temperature and Humidity Test Chamber

Calibrating the temperature of a constant temperature and humidity test chamber is a preparatory task before testing. So, how can you ensure proper calibration of the test equipment? Only after adjusting the temperature of the chamber can testing proceed normally.

What Are the Differences in Performance of Different High and Low Temperature Alternating Test Chambers?

The primary purpose of high and low temperature alternating test chambers is to assess the adaptability of products and determine their performance under various environmental conditions

How to Solve Refrigerant Leakage in Low-Temperature Test Chambers?

Low-temperature test chambers are widely used in aerospace, automotive, home appliances, and scientific research to determine the adaptability of products or materials under different environmental temperatures.