Search for the product you are looking for
Car Navigation Aging Room

Car Navigation Aging Room

Product Introduction
Car navigation aging room, the main simulation of a high-temperature, harsh environment testing equipment, is to improve product stability, reliability of the test equipment.

Service Hotline

4000-662-888
Product Features
Product Parameter
Model Studio Size  (D*W*H)mm Dimension(D*W*H)mm
LRHS-8M-LG 2000×2000×2000 Subject to contractual three-view
LRHS-15M-LG 2500×3000×2000
LRHS-30M-LG 3000×5000×2000
LRHS-60M-LG 5000×6000×2000
temperature range RT+10℃~85℃/RT+10℃~150℃/ RT+10℃~200℃
Temperature uniformity ≤2℃ (at no load)
Temperature fluctuation ±0.5℃(at no load)
Time Setting Range 1~60000M
heating rate RT+10℃~85℃≤30min
Outer case material High-quality library board, CNC finishing
Inner box material Imported high-grade stainless steel SUS304
Insulation material Rigid polyurethane foam + fiberglass
Temperature Controller Imported “UEC” brand temperature and humidity meter
temperature sensor PT100 platinum resistance temperature measurement body
overtemperature protector Korea RAINBOW
Miniature Circuit Breaker Schneider France
standard configuration E-stop switch, three-color indicator light
security protection Over-temperature, fan motor overheating, overall equipment phase failure/reverse phase
Leakage protection, overall equipment timing, overload and short circuit protection
Supply Voltage AC380V±10% 50Hz
Power 15.0kW 20.5kW 28.0kW 35.0kW
operating environment 5℃~+28℃ ≤85% RH
Note:
1、the test data are used in the ambient temperature of 25 ℃ and well ventilated conditions measured
2、Can be customized according to the specific requirements of the user non-standard large-scale car navigation aging room etc
3、This technical information, subject to change without notice

 

Product Recommendation
Industry News
Thermal shock test chambers come in two main configurations: two-chamber and three-chamber designs. When purchasing this equipment, how should customers decide which structure is more suitable?
The uniformity of a thermal shock test chamber directly affects the test results, so it is crucial to maintain optimal uniformity.
You may have heard the recommendation that "a temperature & humidity test chamber should use purified water." But why is that? Can other types of water not be used?