Ultraviolet Pre-treatment Machine-Linpin Instruments

Product Parameter

Model	Studio Size (DWH)mm	Dimension（DWH）mm
LRHS-5980-NGF	2300×1300×2000	Approx. 2800 x 2500 x 2400

Effective irradiance area	2000mm×1000mm
Light intensity range	150～250W/m2
spectral range	280～400nm
UVB/(UVA+UVB)	3～10%
inhomogeneity	≤±15%
Sample temperature range	60±5℃
Sample temperature uniformity	≤±5℃
Outer case material	1.2mm Cold rolled steel plate with plastic spraying on both sides
Inner box material	1.0mm thick SUS304 stainless steel, sunlight simulating fully reflective reflective film mounted on the side wall for secondary sealing and optical reflection control.
Insulation material	10mm Thickness High Quality Insulation Material
Controller	Siemens PLC Module + Touch Screen
Cooling method	Air-cooled/water-cooled refrigeration
Compressor	Taikang, France
Heating method	Nickel-chromium alloy electric wire type heater
standard configuration	UV probes, temperature sensors, lights, lead holes, etc.
security protection		Emergency stop button, sample surface temperature is too high, light source system fault alarm, power supply phase/undervoltage/overvoltage/leakage protection, fan overload, compressor overvoltage/overheat/overcurrent, heating wire over-temperature protection
Supply Voltage		AC380V±10% 50Hz
Power		20.0kW
operating environment		5℃～＋35℃ ≤75% RH
Note: 1、 the above data are measured in the use of ambient temperature of 25 ℃ and well-ventilated conditions 2、Can be customized according to the user’s specific test requirements. 3、This technical information is subject to change without prior notice.

Industry News

Why Does the Compressor of a Low-Temperature Test Chamber Fail to Start?

The compressor is a critical component of a low-temperature test chamber.

What Challenges Might Be Encountered During Rain Test Chamber Testing?

Rain test chambers, also commonly referred to as waterproof test chambers or box-type rain test chambers, are primarily used to evaluate whether the casings or sealed components of electrical and electronic products, household appliances, and various lighting fixtures are affected during rain testing, and whether their operational performance and adaptability can be maintained.

Analysis of the Application of Sand and Dust Test Chambers in the Military Industry

The sand and dust test chamber is used to evaluate the dust resistance of objects in sandy and dusty environments. Currently, this equipment is widely applied across various fields. Today, we will focus on its application in the military industry.