Search for the product you are looking for
研发中心

News

Slide down

Safety Protections and Related Measures of High-Temperature Test Chambers

Source:LINPIN Time:2025-05-07 Category:Industry News

Modern high-temperature test chambers are significantly safer than traditional models due to enhanced safety protection measures and optimized design. So, what specific safety features and protections do these devices offer?

1. Overheat Protection
The test chamber is equipped with an overheat protection device in both the safety channel and sample controller. If the temperature in the test area exceeds the preset limit on the control panel, the chamber will automatically activate the protection mechanism—triggering an alarm and shutting down.

2. Sample Over-Temperature Protection
By setting upper and lower temperature limits, the system ensures that if the sample area temperature surpasses the threshold, the chamber will immediately initiate protective actions, including shutdown and an audible alarm.

high-temperature test chambers

3. Centrifugal Fan Protection
The chamber includes safeguards for the centrifugal fan. If the fan experiences overheating or overcurrent, the protection system will activate, issuing an alarm and powering off the equipment.

4. Power Supply Protection
The device has power safety mechanisms that detect power outages or phase sequence changes. In such cases, the system will sound an alarm and shut down automatically.

5. Refrigeration System & Compressor Protection
The refrigeration unit and compressor are designed with safety protections, such as:

Overpressure protection for the refrigeration system
Overheating protection for the compressor coils
If any abnormality occurs, the system will trigger protective measures.
6. Cooling Water Circulation Protection
If the cooling water circulation pressure fails to meet the required level, the system will issue an alert to prevent operational risks.

Response to Safety Alarms
Once a safety protection mechanism is activated, operators should promptly troubleshoot the issue. If necessary, contact the manufacturer’s technical support for assistance.

Enhanced Safety with Linpin Instruments
Linpin Instruments employs cutting-edge technology to optimize test chamber safety, ensuring smoother and more reliable operation.

(Translation Note: The text has been refined for clarity and conciseness while maintaining technical accuracy. Key terms like “overheat protection,” “centrifugal fan,” and “cooling water circulation” are kept precise for industry professionals.)

News Recommendation
I assume that most of you are no strangers to Linpin's high and low temperature alternating humidity-heat test chamber. While gaining a deep understanding of its application scenarios and operational methods, we must never overlook its maintenance essentials.
Stability is crucial for the accuracy of test results in aging test chambers. Are there any methods to maintain and improve the stability of the chambers during use?
High and low temperature test chambers are designed to simulate natural climatic conditions to test the high- and low-temperature endurance of products or materials under alternating temperature changes.
When discussing the water resistance of electronic products, we often encounter various water resistance standards. Among them, the IPX56 rain test chamber and IP44 water resistance are two common water resistance testing standards.
A constant temperature and humidity test chamber is designed to maintain stable temperature and humidity conditions.
Product Recommendation
Telegram WhatsApp Facebook VK LinkedIn