Search for the product you are looking for
研发中心

News

Slide down

What safety precautions should be taken when using a high and low-temperature test chamber?

Source:LINPIN Time:2025-03-03 Category:Industry News

A high and low-temperature test chamber is designed to simulate natural climatic conditions to test the high- and low-temperature resistance of products or materials under alternating temperature changes. Since the temperature conditions created by the test chamber are more extreme than natural climates, they further enhance the reliability of the tested products. In simple terms, this device is used to test the adaptability of products.
The test chamber can determine whether materials soften, age, lose efficiency, deform, or suffer potential damage under high-temperature conditions, as well as the severity of these issues, to assess the high-temperature resistance of products or materials. Additionally, it can test whether materials crack, have moving parts seizing up, become brittle, or experience changes like water freezing or component performance alterations under low-temperature conditions, and the impact of these changes, to assess low-temperature resistance.
To prevent accidents when using the test chamber, users must take several precautions:
Grounding the Equipment: Ensure that the outer casing of the test chamber is properly grounded. Failure to ground the equipment during installation can lead to electric shock if there is a leakage of electricity.
Complete Installation Before Use: Do not start the equipment until the test chamber is fully installed and all components are securely in place. Ensure that everything is correctly installed before beginning any tests.
Avoid Touching Moving Parts: When the equipment is running and the controller is driving components such as motors and fans, avoid touching any moving parts. Even if they appear stationary, sudden movement can cause injury. If it is necessary to access the moving parts, turn off the main power switch and ensure that all protective devices are in place.
Separate Power Supply for Heated Samples: If the test chamber contains samples that generate heat, do not use the machine’s own power supply to control the samples. Instead, use an external power source.
After purchasing a high and low-temperature test chamber, users must ensure basic safety measures are in place when conducting tests. Safety precautions should not be overlooked even when no tests are being conducted. Neglecting these safety measures can lead to test errors, equipment damage, and, more seriously, pose a threat to the user’s safety.

News Recommendation
With the continuous tightening of ingress-protection requirements in automotive electronics, low-voltage power distribution and photovoltaic industries, repeatable, quantifiable and traceable artificial-rain testing has replaced the traditional “splash-and-inspect” approach and become the core means of verifying sealing performance.
Formaldehyde VOC environmental test chamber, also known as formaldehyde emission testing chambers, are large-scale testing equipment primarily used to simulate standard climatic conditions for measuring the release of formaldehyde from indoor decoration and renovation materials.
For high and low temperature humidity test chambers, daily troubleshooting of abnormalities is essential.
Temperature is the most fundamental—and most brutal—physical parameter influencing the reliability of materials, components and complete systems. GB/T 2423.1, GB/T 2423.2, GJB 150.3A, GJB 150.4A, DO-160 Section 4/5, IEC 60068-2-1/-2 and MIL-STD-810H all quantify requirements for temperature slew rate, dwell time, heat load and measurement uncertainty.
Dust testing, codified in GB/T 2423.37 and IEC 60068-2-68, is now mandatory for proving the sealing integrity and reliability of military, automotive, photovoltaic and rail-transit products. Direct test outlays—consumables, energy, labour and depreciation—seldom exceed one to three per cent of the selling price, yet hidden expenses triggered by poor chamber selection—repeat tests, invalid data or after-sales downtime—can leap to eight to twelve per cent.
Product Recommendation
Telegram WhatsApp Facebook VK LinkedIn