Walk-in Low Temperature Test Chamber-Linpin Instruments

Product Parameter

Model	Studio Size (DWH)mm	Dimension（DWH）mm
LRHS-8MB-LD	2000×2000×2000	Subject to contractual three-view
LRHS-15MB- LD	2500×3000×2000
LRHS-30MB- LD	3000×5000×2000
LRHS-60MB- LD	5000×6000×2000

temperature range	A：-20℃～RT B：-40℃～RT C：-60℃～RT D：-70℃～RT
Temperature uniformity	≤2℃ (at no load)
Temperature fluctuation	±0.5℃(at no load)
Time Setting Range	1～60000M
cooling rate	RT～-40℃≤30min
Outer case material	High-quality library board, CNC finishing
Inner box material	Imported high-grade stainless steel SUS304
Insulation material	Rigid polyurethane foam + fiberglass
Temperature Controller	Imported “UEC” brand temperature and humidity meter
temperature sensor	PT100 platinum resistance temperature measurement body
Cooling method	Single or double cascade refrigeration
compactors	Tycon (France) / BITZER (Germany)
standard configuration		Emergency stop switch, three-color indicator light
security protection		Compressor overpressure overload, over temperature, fan motor overheating, leakage protection Overall equipment phase/reverse phase, test timing, overload and short-circuit protection
Supply Voltage		AC380V±10% 50Hz
Power		（A）17.0kW/27.5kW/42.0kW/56.0kW （B）20.0kW/34.5kW/50.5kW/68.5kW （C）29.5kW/43.5kW/58.0kW/75.0kW
operating environment		5℃～＋28℃ ≤85% RH
Note: 1、the test data are used in the ambient temperature of 25 ℃ and well ventilated conditions measured 2、Can be customized according to the specific requirements of the user non-standard walk-in low temperature test chamber etc 3、This technical information, subject to change without notice

Industry News

How to Keep an Aging Test Chamber in Optimal Condition?

An aging test chamber does not refer to a single device but encompasses various testing methods, including xenon lamp aging tests, UV aging tests, high-temperature aging tests, air-exchange aging tests, and salt spray corrosion aging tests.

How to test the waterproofness of the rain test chamber

Rain test chamber is a test instrument to test whether the waterproof is good, the figure of this equipment can be said to be everywhere, applied in various places. Small to our usual use of cell phones, flashlights and other lighting apparatus; large to the aerospace industry, lighting systems, signaling device testing and so on. Waterproof has always been a lot of industry can not get around a topic, a lot of equipment once the rain and other wet, its service life will be greatly reduced, this equipment in the waterproof performance test link plays a vital role.

Are you familiar with the operation of a temperature shock test chamber?

Temperature shock test chambers on the market are divided into two main types. One type is the two-chamber model, which includes a high-temperature zone and a low-temperature zone.