Search for the product you are looking for
Deep Cold Test Chamber

Deep Cold Test Chamber

Product Introduction
Deep cold test chamber is mainly used in aviation, aerospace, information, electronics and other fields, to determine the instrumentation, electrical products, materials, components, equipment in the high temperature, low temperature single or simultaneous role of the environmental adaptability and reliability of the test, and or at the same time on the specimen energized for the measurement of electrical performance parameters.

Service Hotline

4000-662-888
Product Features
Product Parameter
Formaldehyde VOC environmental test chamber Studio Size  (D*W*H)mm Dimension(D*W*H)mm
LRHS-101-LD 450×450×500 1100×900×1350
LRHS-225-LD 500×600×750 1150×1100×1600
LRHS-504-LD 700×800×900 1350×1300×1750
LRHS-800-LD 800×1000×1000 1450×1500×1850
LRHS-1000-LD 1000×1000×1000 1450×1500×1850
temperature range -196℃~RT
Temperature uniformity ≤2℃ (at no load)
Temperature fluctuation ±1℃(at no load)
heating rate ≥3℃/min
cooling rate ≥3℃/min
Time Setting Range 1~60000M
Outer case material High quality A3 steel plate electrostatic spraying
Inner box material Imported high-grade stainless steel SUS304
Insulation material Rigid polyurethane foam + fiberglass
Temperature Controller Imported “UEC” brand temperature meter
temperature sensor PT100 platinum resistance temperature measurement body
Cooling method liquid nitrogen refrigeration
standard configuration Sample racks, 2 tiers, with condensate catch pan and drain out of the box
security protection Compressor overpressure, overload, motor overheating, overall equipment phase failure/reverse phase
Over-temperature, overall equipment timing, leakage protection, overload and short-circuit protection
Supply Voltage AC220V±10% 50HZ AC380V±10% 50HZ
Power 2.5kW/3.0kW/4.5kW/6.5kW/6.5kW
operating environment 5℃~+28℃ ≤85% RH
Note:
1、the above data are in the use of ambient temperature of 25 ℃ and well ventilated conditions measured
2、Can be customized according to the specific requirements of the user non-standard deep cold test chamber etc
3、This technical information, if there is any change without prior notice

 

Product Recommendation
Industry News
The lamps in a UV aging test chamber will degrade over prolonged use, and aging lamps need to be replaced promptly. So, how do you select the right lamp for the test chamber? Are there any tips for making the right choice? Today, we’ll share some useful tips for selecting UV aging test chamber lamps.
You may have heard the recommendation that "a temperature & humidity test chamber should use purified water." But why is that? Can other types of water not be used?
Safety is a fundamental requirement for any equipment. When operating a thermal shock test chamber, certain safety precautions must be observed. Below is a brief introduction to key safety considerations.