Vibration Test Bench-Linpin Instruments

Product Parameter

Model	Studio Size (DWH)mm	Dimension（DWH）mm
LRHS-600-UP	500×500	500×200×500
LRHS-600-UHP	500×500	500×250×500
LRHS-600-UTP	500×500	500×200×500 500×250×500
LRHS-600-UATP	500×500	500×450×500
LRHS-600-UXTP	500×500	500×650×500

frequency range	L：50Hz P：1～600Hz W：1～3000Hz T：1～5000Hz
frequency deviation	15%
Direction of vibration	Vertical H: Horizontal T: Vertical + Horizontal AT: Four Degrees of Space XT: Six Degrees of Space
Vibration waveform	simple harmonic vibration
vibration function	FM function, sweep function, programmable function, octave function, logarithmic function
time control	Any time can be set (in seconds)
maximum acceleration	15g or 20g（1g=9.8m/s²）
Maximum test load	75kg or 100kg
Acceleration formula	0.002 x f² x D (in g) f = frequency (in Hz) D is amplitude (P-P)
Temperature Controller	Taiwan High Precision Digital Display Instrument
standard configuration		Expansion Screws, Ground Feet, Tie Downs
security protection		Leakage protection, short circuit protection
Supply Voltage		AC220V±10% 50Hz AC380V±10% 50Hz
Power		2.2(kW)
Note: 1、can be customized according to the size of the user test sample table size, such as 750 × 750mm, 1000 × 1000mm 2、 the end of the model letter that represents the frequency, such as L on behalf of the fixed frequency of 50HZ, P on behalf of the 1 ~ 600HZ 3、 the penultimate letter of the model that represents the direction of vibration, such as H on behalf of the horizontal direction, T on behalf of the vertical plus horizontal 4、 the model in the ATP on behalf of the model for the four-degree space vibration machine, such as XTP for the six-degree space vibration machine 5、 four degrees of space refers to the vertical and horizontal in the same body to achieve, six degrees of space refers to vertical and horizontal before and after the same body to achieve 6、This technical information is subject to change without notice.

Industry News

Cold and heat shock test chamber operation you understand?

Cold and thermal shock test chamber on the market is divided into two categories, a two-compartment type, including high-temperature region and low-temperature region, the test object were in two different temperatures in the area of the test, hot and cold alternating test; the other is a three-compartment type, in addition to high-temperature and low-temperature areas, there is also a test area, and the two-compartment different is that the three-compartment does not need to be directly in the test area for the test, only need to be through the air compression method

Comparison of Experimental Environments: Constant Temperature and Humidity Test Chamber vs. High and Low Temperature Test Chamber

In the field of quality inspection and reliability testing, constant temperature and humidity test chambers and high and low temperature test chambers are two commonly used environmental simulation devices, each with unique functions and application scenarios.

Ozone Aging Test Chamber: The “Detection Master” of Material Aging Performance

In the field of material research and production, the ozone aging test chamber plays a crucial role. It acts like a professional "detection master," precisely simulating an ozone environment to help people gain a deep understanding of the aging performance of materials under specific conditions.