Military Standard Sand and Dust Test Chamber-Linpin Instruments

Product Parameter

Studio Size (DWH)mm	600×700×600（DWH）mm
Dimension（DWH）mm	4200×2200×2000（DWH）mm
temperature range	23℃～70℃
temperature deviation	≤±2℃
Humidity range	＜30%RH
Dust blowing air speed	1.5～8.9 m/s
Sand blowing wind speed	18.0～29.0 m/s
Blowing Dust Concentration	3.0～17.6 g/m³ (10.7 ± 7 g/m³)
sandblast concentration	0.18 + 0.2 g/m³；1.1 ± 0.3 g/m³；2.2 ± 0.5 g/m³
Test dust	quartz dust
Sand Size	≤ 149 μm to pass through a 150 μm diameter mesh.
viewing window	300×300mm(Effective vision)
Outer case material	High quality A3 steel plate electrostatic spraying
Inner box material	Imported high-grade stainless steel SUS304
Temperature Controller	Imported “UEC” brand temperature meter
standard configuration		Fuse set
Supply Voltage		AC380V±10% 60Hz
Power		45kW
operating environment		5℃～＋28℃ ≤85% RH
Note: 1、the above data are in the use of ambient temperature of 25 ℃ and well ventilated conditions measured 2、Can be customized according to the specific requirements of the user non-standard military standard sand and dust test chamber etc 3、This technical information, if there is any change without prior notice

Industry News

Why Has the Compressor of the High and Low Temperature Alternating Humidity Test Chamber Stopped Working?

When troubleshooting issues with a high and low temperature alternating humidity test chamber, it is essential to first identify the root cause of the problem.

Reduce Your Testing Time with Salt Spray Test Chambers

Conducting salt spray tests in natural environments through exposure is not only time-consuming but also yields results that are often inconsistent and difficult to control.

Have You Learned the Cleaning Tips for the Constant Temperature and Humidity Test Chamber?

In the workshops of some enterprises, we often see a brand-new constant temperature and humidity test chamber that, after a short period of use, becomes covered in oil stains and dust.