Search for the product you are looking for
研发中心

News

Slide down

Tips: Emergency Response Plan for Temperature Overshoot in Constant Temperature and Humidity Test Chambers

Source:LINPIN Time:2025-05-28 Category:Industry News

If the temperature exceeds the set value during testing in a constant temperature and humidity test chamber, how should we resolve it? Are there any emergency response measures?

constant temperature and humidity test chamber

As we all know, temperature overshoot in a constant temperature and humidity test chamber can affect the accuracy of test results. Therefore, such situations require prompt attention. Temperature overshoot refers to the temperature exceeding the allowable range. However, some degree of overshoot is permissible under certain conditions:

If the test point allows for a certain temperature range, the overshoot may vary within approximately 2°C.
If the temperature exceeds a specified stability limit, the overshoot should not exceed 2% of the test point.
For example, within 0–100°C, the overshoot should not exceed 2°C.
For temperatures above 100°C, the overshoot should not exceed 2% of the test point.
If the temperature overshoot falls within these ranges, it is considered acceptable. However, if the overshoot exceeds these limits, it is necessary to investigate whether a malfunction has occurred. In such cases, contact the manufacturer’s technical personnel for calibration or seek assistance from a professional service provider.

After purchasing the equipment, users should familiarize themselves with the product specifications of the constant temperature and humidity test chamber. This will help operators determine whether the issue is within controllable limits and take appropriate corrective measures. Our company not only provides high-quality testing equipment but also offers continuous after-sales support to promptly troubleshoot any issues.

Generally, the control system is the “brain” of a constant temperature and humidity test chamber, determining critical parameters such as heating rate and accuracy. Many modern devices use PID controllers. Our company’s constant temperature test equipment features an upgraded control system with high precision and advanced automation.

Currently, we offer a variety of chamber sizes to meet different testing requirements. Domestic and international customers can select the most suitable model based on their material characteristics. We welcome visits to our facility for on-site inspections and equipment purchases. Our company is committed to providing environmental testing solutions and high-performance equipment for the industry.

News Recommendation
Sand and dust test chambers primarily simulate sandstorm climates to test the dust-proof performance and IP dust-proof ratings of products and materials such as electric meters, outdoor lighting, signaling devices, automotive components, and locks.
A constant temperature and humidity test chamber consists of multiple components, and any malfunction can disrupt testing. Previously, we discussed troubleshooting methods for other issues. Today, we focus on expansion valve failures.
The formaldehyde VOC environmental test chamber is primarily used to detect formaldehyde content in building materials, artificial panels, curtains, carpets, and other products.
To ensure the accuracy of test results from a low-temperature test chamber, the following points should be noted during operation
If your salt spray test chamber experiences spray failure, the issue may be a clogged nozzle. So, how should you handle nozzle clogging? Here’s a clever trick from our experts—a simple guide on how to resolve nozzle blockages in testing equipment.
Product Recommendation
Telegram WhatsApp Facebook VK LinkedIn