Wind power rotor test chamber-Linpin Instruments

Product Parameter

Model	LRHS-6400A-LJS
Studio Size (DWH)mm	1600×2000×2000（DWH）mm
Dimension（DWH）mm	2450×2400×3120（DWH）mm
temperature range	0℃～40℃
Humidity range	10%～98% RH
Temperature uniformity	≤2℃ (at no load)
Humidity uniformity	+2% -3% RH (at no load)
Temperature fluctuation	±0.5℃ (at no load)
Humidity fluctuation	±2%RH (at no load)
temperature deviation	±2℃ (at no load)
Humidity Deviation	>75%RH ±2.5%RH <75%RH ±5%RH
cooling rate	1℃～3℃/min(average throughout)
heating speed	1℃～3℃/min(average throughout)
Time Setting Range	1～60000M
Power consumption	32.0kW
Outer case material	High-quality cold-rolled steel plate, surface plastic spraying treatment
Inner box material	Imported high-grade stainless steel SUS304
Insulation material	Rigid polyurethane foam + fiberglass
Temperature Controller	Imported “UEC” brand temperature and humidity meter
Supply Voltage	AC380V±10% 50Hz
Note: 1、the test data are used in the ambient temperature of 25 ℃ and well ventilated conditions measured 2、Can be customized according to the specific requirements of the user non-standard wind power rotor test chamber etc 3、This technical information, subject to change without notice

Industry News

Quick Handling of Sand and Dust Test Chamber Failures

When encountering malfunctions in the sand and dust test chamber, how should they be addressed? Is it necessary to contact after-sales service? In fact, some issues can be initially troubleshooted by the customer, such as the following scenarios.

Pay Attention to These Points to Ensure Uniformity in Your Thermal Shock Test Chamber

The uniformity of a thermal shock test chamber directly affects the test results, so it is crucial to maintain optimal uniformity.

‌Temperature Shock Test Chamber, Simulating High and Low Temperature Impact Environments on Samples or Products‌

The temperature shock test chamber, also known as a thermal shock test chamber or high-low temperature impact test chamber, is a device used to simulate extreme temperature variations under controlled environmental conditions.