Walk-in High and Low Temperature Test Chamber-Linpin Instruments

Product Features

Product application:
The large walk-in high and low temperature test chamber is suitable for testing the performance metrics of aerospace products, information electronic instruments and meters, materials, electrical and electronic products, and various electronic components under conditions of high and low temperatures or humid and hot environments.

Compliance with standards:
GB/T2423.1-2001 GB/T2423.2-2001 GB10592－89
Chamber structure:
The base of the large walk-in high and low temperature test chamber is constructed using an 8# channel steel welded into a grid-like frame.

This design ensures that the base can support the weight of the chamber and the personnel and test specimens under level conditions, without causing unevenness or cracking on the chamber floor.

The load-bearing capacity is 200 kg per square meter.

The chamber (main body of the test chamber, also known as the shell) consists of six chamber surfaces and a double-leaf chamber door with dimensions of 1800 mm × 2000 mm.

The chamber material includes an inner lining of high-quality stainless steel plate (to prevent rusting of the inner walls during long-term operation in humid conditions) and an outer lining of high-quality color-coated steel plate (a domestic brand).

The insulation medium is polyurethane rigid foam, which is lightweight, impact-resistant, and provides excellent thermal insulation.

The door material is also made of color-coated steel plate, and the door handle is designed for easy opening from both the inside and outside, allowing test personnel to freely open the door from within the enclosed chamber.
Control system:
The large walk-in high and low temperature test chamber is equipped with an imported programmable touch-screen LCD display featuring a Chinese dialog interface, as well as a microcomputer integrated controller.
Refrigeration system:
Compressor: Fully imported semi-hermetic German Copeland compressor.

Drier filter: American "Arico" brand. Oil separator: Taiwanese "Guan Ya" brand. Solenoid valve: Italian "Castel" brand.

The refrigeration system adopts a single-stage or two-stage low-temperature loop system design.

A multi-blade fan is used for powerful air circulation, eliminating any dead zones and ensuring uniform temperature distribution within the test area.

The airflow design for exhaust and return air meets the testing standards for air pressure and velocity, and allows for rapid temperature stabilization after the door is opened.

The heating, cooling, and systems are completely independent, which can improve efficiency, reduce testing costs, extend service life, and lower the failure rate.

Product Parameter

Model	Studio Size (DWH)mm	Dimension（DWH）mm
LRHS-2000B-LJ	1000×2000×1000	Subject to contractual three-view
LRHS-4000B-LJ	2000×2000×1000
LRHS-6000B-LJ	2000×3000×1000
LRHS-8000B-LJ	2000×2000×2000

temperature range	A：-20℃～150℃ B：-40℃～150℃ C：-60℃～150℃ D：-70℃～150℃
Temperature uniformity	≤2℃ (at no load)
Temperature fluctuation	±0.5℃ (at no load)
Time Setting Range	1～60000M
heating rate	-40℃～100℃≤90min
cooling rate	100℃～-40℃≤90min
Outer case material	High quality A3 steel plate electrostatic spraying
Inner box material	Imported high-grade stainless steel SUS304
Insulation material	Rigid polyurethane foam + fiberglass
Temperature Controller	Imported “UEC” brand temperature meter
temperature sensor	PT100 platinum resistance temperature measurement body
Cooling method	Single or double cascade refrigeration
compactors	France Tycon/Germany BITZER/Germany Gulen
standard configuration		Emergency stop switch, three-color indicator light
security protection		Compressor overpressure overload, over temperature, fan motor overheating, leakage protection Overall equipment phase/reverse phase, test timing, overload and short-circuit protection
Supply Voltage		AC380V±10% 50Hz
Power		（A）13.5kW/16.0kW/18.5kW/21.0kW （B）15.0kW/18.5kW/22.0kW/25.0kW （C）18.5kW/24.0kW/28.0kW/34.5kW
operating environment		5℃～＋28℃ ≤85% RH
Note: 1、the test data are used in the ambient temperature of 25 ℃ and well ventilated conditions measured 2、Can be customized according to the specific requirements of the user non-standard walk-in high and low temperature test chamber etc 3、This technical information, subject to change without notice

Industry News

How to test the waterproofness of the rain test chamber

Rain test chamber is a test instrument to test whether the waterproof is good, the figure of this equipment can be said to be everywhere, applied in various places. Small to our usual use of cell phones, flashlights and other lighting apparatus; large to the aerospace industry, lighting systems, signaling device testing and so on. Waterproof has always been a lot of industry can not get around a topic, a lot of equipment once the rain and other wet, its service life will be greatly reduced, this equipment in the waterproof performance test link plays a vital role.

How is Temperature Controlled in a High-Low Temperature Alternating Humidity Test Chamber?

Accurate temperature control in a high-low temperature alternating humidity test chamber enhances testing precision. Therefore, it is essential to understand the temperature control process of the testing equipment.

Cold and Hot Shock Test Chamber: Pre-Trial Cleaning of Test Specimens

The cold and hot shock test chamber is an effective device for detecting the performance of electronic components under rapidly changing temperature conditions. Many materials are tested using this equipment. To ensure the accuracy of the test results, it is necessary to clean the test specimens before the test chamber is operated.