Search for the product you are looking for
Salt spray constant temperature and humidity test chamber

Salt spray constant temperature and humidity test chamber

Product Introduction
Salt spray constant temperature and humidity test chamberfor aerospace products, information and electronic instruments, materials, electricians, electronic products, various electronic components in the high and low temperatures or hot and humid environment, the test of its performance indicators. Salt spray for parts, electronic components, metal materials, protective layer and industrial products salt spray corrosion test.

Service Hotline

4000-662-888
Product Features
Product Parameter
Model Studio Size  (D*W*H)mm Dimension(D*W*H)mm
LRHS-504-RYGS 700×800×900 Subject to contractual three-view
LRHS-800-RYGS 800×1000×1000
LRHS-1000-RYGS 1000×1000×1000
temperature range RT+5℃~60℃
Saturated drum temperature RT+10℃~60℃
Temperature uniformity ≤2℃
Temperature fluctuation ±0.5℃
Salt spray deposition 1~2ml/80 cm².h(16-hour average)
Spraying method Wall-mounted spray pattern
temperature range RT+10℃~100℃
Humidity range 85%~98%RH
Temperature uniformity ±2℃ (at no load)
Temperature fluctuation ±0.5℃ (at no load)
Humidity fluctuation ±1%
temperature deviation ±2℃
Humidity Deviation ±3%
temperature range RT+10℃~200℃
Temperature uniformity ±2℃ (at no load)
Temperature fluctuation ±0.5℃ (at no load)
temperature deviation ±2℃
Case Material High quality 316 stainless steel
Studio Materials Imported high-grade stainless steel SUS304
Air-saturated drums Imported high-grade stainless steel SUS304
Pressurized Air Hose Material High quality rubber hose
Other pipelines Thickened Fluorosilicone Rubber Tubing
Temperature Controller Imported “UEC” brand temperature and humidity meter
temperature sensor PT100 platinum resistance temperature measurement body
heater Titanium Heating Tube
interrupter Schneider miniature circuit breakers (to prevent short circuits in control circuits)
standard configuration V-shaped sample holder, round bar, nozzle, funnel, measuring cylinder, mist exhaust pipe
security protection Over-temperature, overall equipment under-phase/reverse phase, overall equipment timing
Quick fog discharge indication, end of test, low water level protection, electric leakage and short circuit
Supply Voltage AC380V±10% 50Hz
Power 10.0kW 13.5kW 16.0kW
operating environment 5℃~+28℃ ≤85% RH
Note:
1、 the test data are used in the ambient temperature of 25 ℃ and well ventilated conditions measured
2、The above parameters are for reference only, and can be customized according to user-specific test parameters.
3、This technical information, subject to change without notice

 

Product Recommendation
Industry News
There are many important considerations when selecting and using a formaldehyde/VOC environmental test chamber. How many of these are you aware of? Today, we’ll share a few key points—have you noticed them?
Formaldehyde VOC environmental test chamber, also known as formaldehyde emission testing chambers, are large-scale testing equipment primarily used to simulate standard climatic conditions for measuring the release of formaldehyde from indoor decoration and renovation materials.
Rain test chambers are now widely used across various industries. When operating this equipment, staff should be familiar with essential knowledge, such as the necessary pre-use inspections. Let’s go through them today.
Telegram WhatsApp Facebook VK LinkedIn