AB Constant Temperature and Humidity Box-Linpin Instruments

Product Parameter

Model		Studio Size (DWH)mm	Dimension（DWH）mm
LRHS-2X1000C-LH		Room A: 1000×1000×1000 Room B: 1000×1000×1000	Approx. 2400 x 2900 x 2150

temperature range	-60℃～180℃
Temperature uniformity	≤2℃ (at no load)
Temperature fluctuation	±0.5℃(at no load)
Time setting range	1～60000M
Humidity range	20%～98% RH
Humidity uniformity	+2% -3% RH
Humidity fluctuations	±2%
Heating rate	2.0～3.0℃/min
cooling rate	1.0～2.0℃/min
test hole	Mounted on the left/right side of the machine at ø80mm for use with external test power cables or signal cables.
Observation window	395×395mm(Effective vision)
Outer box material	High quality A3 steel plate electrostatic spraying
Inner box material	High quality stainless steel SUS304
Insulation material	Rigid polyurethane foam + fiberglass
Temperature and humidity controller	Japan “UEC” temperature and humidity meter
Temperature and humidity sensors	Electronic sensors
Cooling method	Two-machine cascade refrigeration
compactors	BITZER Compressors
standard configuration		1 roll of wet bulb gauze, 2 sample racks, with condensate catch pan and drain out of the box
security protection		Compressor overpressure overload, over temperature, fan motor overheating, leakage protection Overload and short-circuit protection for the whole machine, under-phase/reverse-phase, timing of the whole equipment, overload and short-circuit protection.
Supply Voltage		AC380V±10% 50Hz
Power		25.5kW
operating environment		5℃～＋28℃ ≤85% RH
Note: 1、the test data are used in the ambient temperature of 25 ℃ and well ventilated conditions measured 2、Can be customized according to the specific requirements of the user non-standard AB constant temperature and humidity box etc 3、This technical information, subject to change without notice

Industry News

How to Choose the Right Size for a Constant Temperature and Humidity Test Chamber

Different models of constant temperature and humidity test chambers come in varying sizes. If customers are unfamiliar with the equipment, how should they determine the appropriate size?

How to Test Corrosion Resistance with a Salt Spray Test Chamber

The salt spray test chamber is primarily used to evaluate the corrosion resistance of test samples. It is widely applied in industries such as electrical engineering, digital accessories, plastic products, and aerospace manufacturing to assess the corrosion resistance of products and simulate their performance under extreme environmental conditions.

How to Enhance the Safety of Low-Temperature Test Chambers?

The safety of low-temperature test chambers during operation is of utmost importance. Not only must environmental safety measures be in place, but proper operational protocols must also be followed.