Airbag Ignition Test Chamber-Linpin Instruments

Product Parameter

Studio Size (DWH)mm	5000×2700×2100（DWH）mm
Dimension（DWH）mm	5300×5900×2960（DWH）mm
temperature range	-60℃～130℃
temperature deviation	+2～-3%（＞75%RH）±5%RH（≤75%RH）
Controller display accuracy	0.1℃
heating rate	2.0℃/min
cooling rate	2.0℃/min
Number of Lamps	3 sticks.
Total lamp power	12.0KW
Door Size	2700×2100mm
Observation area	Window/door window: 2 panes 1000×1500mm Window on the back wall/corresponding to the front door: 2 panes 1000×1500mm Window on the right/corresponding to the left: 3 panes 1200×1500mm Window on the left side: 3 panes 1200×1500mm
Test aperture	Diameter 150mm
Controller	Imported “UEC” brand temperature meter
Supply Voltage	AC380V±10% 50Hz
Note: 1、the test data are used in the ambient temperature of 25 ℃ and well ventilated conditions measured 2、Can be customized according to the specific requirements of the user non-standard airbag ignition test chamber etc 3、This technical information, subject to change without notice

Industry News

How to Choose the Right Damp Heat Test for Your Temperature & Humidity Test Chamber

When using a high-low temperature alternating damp heat test chamber, the appropriate damp heat test method should be selected based on the material characteristics and testing requirements.

The Importance of Sealing for High and Low Temperature Alternating Test Chambers

Previously, we discussed several factors that affect the test results of high and low temperature alternating test chambers. One critical factor is the sealing performance of the equipment, as poor sealing can lead to the following issues

Technical Analysis of Simulated-Environment Test Procedures in Rain Test Chambers –– A Comprehensive Overview Based on IEC 60068-2-18, ISO 20653 and Major OEM Standards

With the continuous tightening of ingress-protection requirements in automotive electronics, low-voltage power distribution and photovoltaic industries, repeatable, quantifiable and traceable artificial-rain testing has replaced the traditional “splash-and-inspect” approach and become the core means of verifying sealing performance.