Ageing room-Linpin Instruments

Product Parameter

Model	Studio Size (DWH)mm	Dimension（DWH）mm
LRHS-8M-LG	2000×2000×2000	Subject to contractual three-view
LRHS-15M-LG	2500×3000×2000
LRHS-30M-LG	3000×5000×2000
LRHS-60M-LG	5000×6000×2000

temperature range	RT+10℃～85℃/RT+10℃～150℃/ RT+10℃～200℃
Temperature uniformity	≤2℃ (at no load)
Temperature fluctuation	±0.5℃ (at no load)
Time Setting Range	1～60000M
heating rate	RT+10℃～85℃≤30min
Outer case material	High-quality library board, CNC finishing
Inner box material	Imported high-grade stainless steel SUS304
Insulation material	Rigid polyurethane foam + fiberglass
Temperature Controller	Imported “UEC” brand temperature and humidity meter
temperature sensor	PT100 platinum resistance temperature measurement body
overtemperature protector	Korea RAINBOW
Miniature Circuit Breaker	Schneider France
standard configuration		Emergency stop switch, three-color indicator light
security protection		Over-temperature, fan motor overheating, overall equipment phase failure/reverse phase Leakage protection, overall equipment timing, overload and short circuit protection
Supply Voltage		AC380V±10% 50Hz
Power consumption		15.0kW	20.5kW	28.0kW	35.0kW
operating environment		5℃～＋28℃ ≤85% RH
Note: 1、the test data are used in the ambient temperature of 25 ℃ and well ventilated conditions measured 2、The above parameters are for reference only, and can be customized according to user-specific test parameters. 3、This technical information, subject to change without notice

Industry News

White Paper on Rain-Test Chamber Installation Specification and Cross-Industry Testing Applications

With the continuous updating of GB/T 4208-2017, IEC 60529:2013, MIL-STD-810H and other domestic and international protection-class standards, “rain testing” has evolved from a simple “water-proof check” into a systematic evaluation covering sealing reliability, material weatherability, structural integrity, electronic compatibility and more.

Remember these tips, and operating the constant temperature and humidity test chamber will be safe and simple.

The constant temperature and humidity test chamber is widely used in many industries. To reduce the failure rate and accident rate during use

Review of Property Changes in Test Specimens During Low-Temperature Testing

Following our previous discussion on the effects of high-temperature environmental testing, this paper systematically summarizes the typical property changes that occur in test specimens within low-temperature test chambers (hereinafter referred to as “the equipment”).