Temperature and Humidity Environment Test Chamber-Linpin Instruments

Product Parameter

Model	Studio Size (DWH)mm	Dimension（DWH）mm
LRHS-8MB-LJS	2000×2000×2000	Subject to contractual three-view
LRHS-15MB-LJS	2500×3000×2000
LRHS-30MB-LJS	3000×5000×2000
LRHS-60MB-LJS	5000×6000×2000

temperature range	A：-20℃～100℃ B：-40℃～100℃ C：-60℃～100℃ D：-70℃～100℃
Temperature uniformity	≤2℃ (at no load)
Temperature fluctuation	±0.5℃(at no load)
Time Setting Range	1～60000M
Humidity range	30%～98% RH
Humidity uniformity	+2% -3% RH
Humidity fluctuations	±2%
heating rate	-40℃～100℃≤90min
cooling rate	100℃～-40℃≤90min
Outer case material	High-quality library board, CNC finishing
Inner box material	Imported high-grade stainless steel SUS304
Insulation material	Rigid polyurethane foam + fiberglass
Temperature and humidity controller	Imported “UEC” brand temperature and humidity meter
Temperature and humidity sensors
Cooling method	Single or double cascade refrigeration
compactors	France Tycon/Germany BITZER/Germany Gulen
standard configuration		Wet bulb gauze, emergency stop switch, three-color indicator light
security protection		Compressor overpressure overload, over temperature, fan motor overheating, leakage protection Overall equipment phase/reverse phase, test timing, overload and short-circuit protection
Supply Voltage		AC380V±10% 50Hz
Power		（A）20.0kW/31.0kW/48.0kW/60.0kW （B）25.0kW/38.5kW/55.0kW/72.0kW （C）34.5kW/48.5kW/62.5kW/80.0kW
operating environment		5℃～＋28℃ ≤85% RH
Note: 1、the test data are used in the ambient temperature of 25 ℃ and well ventilated conditions measured 2、Can be customized according to the specific requirements of the user non-standard temperature and humidity environment test chamber etc 3、This technical information, subject to change without notice

Industry News

High and Low Temperature Test Chamber – Product Introduction (Detailed & Comprehensive Version)

High and Low Temperature Test Chambers are widely used in industrial and scientific research fields to simulate and test the performance and reliability of products under extreme temperature conditions. They expose materials, components, and finished products to extremely cold or hot environments to ensure their reliability and stability in real-world applications.

Cold and heat shock test chamber operation you understand?

Cold and thermal shock test chamber on the market is divided into two categories, a two-compartment type, including high-temperature region and low-temperature region, the test object were in two different temperatures in the area of the test, hot and cold alternating test; the other is a three-compartment type, in addition to high-temperature and low-temperature areas, there is also a test area, and the two-compartment different is that the three-compartment does not need to be directly in the test area for the test, only need to be through the air compression method

How to Safely and Accurately Use a High and Low Temperature Alternating Test Chamber

Many users often overlook seemingly minor details when operating a high and low temperature alternating test chamber. However, these small oversights can lead to unreliable test results or even safety hazards.