Search for the product you are looking for
Drop Test Machine

Drop Test Machine

Product Introduction
Drop test machine, drop test bench for product packaging in the simulation of different angles, corners, surfaces at different heights when dropped on the ground, so as to understand the damage to the product and assess the product packaging components in the fall can withstand the height of the fall and impact strength. Thus, according to the actual situation of the product and the national standards within the scope of improvement, perfect packaging design.

Service Hotline

4000-662-888
Product Features
Product Parameter
Model Drop height mm Dimension(D*W*H)mm
LRHS-318-UD 300~1500 1650×1150×2260
Drop height range 300~1500mm
Height display method digital
Maximum specimen size 1000×800×1000mm
Impact Panel Size 1600×1100×14mm
Control box external dimensions 300×350×1100mm
External Dimension of Test Stand 1650× 1150×2260mm
height adjustment motor drive
Falling mode Facets, edges and corners
Drop Plane Error <1°
Drop height error ±10mm (adjustable)
Maximum weight of specimen 75kg
accelerations >7g
security protection Motor failure protection, high and low limit protection, emergency stop, power leakage protection, short circuit protection
Supply Voltage AC380V±10% 50Hz
Power 1.5kW
Note:
1、Can be customized according to the user test requirements of the test maximum weight
2、This technical information is subject to change without prior notice.

 

Product Recommendation
Industry News
Cold and thermal shock test chamber on the market is divided into two categories, a two-compartment type, including high-temperature region and low-temperature region, the test object were tested in two different temperatures in the area of the test, alternating hot and cold test; the other is a three-compartment type, in addition to high-temperature and low-temperature areas, there is also a test area, and the difference between the two-compartment is that the three-compartment type does not need to be tested directly in the test area.
The safety of low-temperature test chambers during operation is of utmost importance. Not only must environmental safety measures be in place, but proper operational protocols must also be followed.
Previously, we discussed several factors that affect the test results of high and low temperature alternating test chambers. One critical factor is the sealing performance of the equipment, as poor sealing can lead to the following issues
Telegram WhatsApp Facebook VK LinkedIn