IP9K Waterproof Test Chamber-Linpin Instruments

Product Parameter

Studio Size (DWH)mm	1000×1000×1000（DWH）mm
test temperature	80℃
injector	4
spray angle	0°，30°，60°，90°
injection time	At least 30s
water jet pressure	100bars
Temperature Controller	Imported “UEC” brand temperature meter
viewing window	395×395mm（(effective field of view)
Time Setting Range	1～60000M
Outer case material	High-quality library boards
Inner box material	Imported high-grade stainless steel SUS304
rotary table	Countertop in (SUS304) stainless steel
Other Accessory Materials	All parts in contact with water are made of stainless steel or copper.
security protection		Overall equipment timing, leakage protection Short-circuit protection and automatic shutdown after fault alarms
Supply Voltage		AC380V±10% 50Hz
Power		12.5kW
operating environment		5℃～＋28℃ ≤85% RH
Note: 1、the test data are used in the ambient temperature of 25 ℃ and well ventilated conditions measured 2、The above parameters are for reference only, and can be customized according to user-specific test parameters. 3、This technical information, subject to change without notice

Industry News

How to Detect Leaks in a Temperature Cycling Test Chamber

Previously, we have discussed many technical aspects of temperature cycling test chambers. Today, we will share methods for detecting leaks in these chambers. Specifically, there are four main approaches to check for leaks.

Ozone Aging Test Chamber: The “Detection Master” of Material Aging Performance

In the field of material research and production, the ozone aging test chamber plays a crucial role. It acts like a professional "detection master," precisely simulating an ozone environment to help people gain a deep understanding of the aging performance of materials under specific conditions.

Guidelines for Selecting Humidity Test Methods in High-Low Temperature Cyclic Humidity Chambers —A Systematic Decision Based on Specimen Characteristics and Failure Mechanisms

In generic reliability standards such as GB/T 2423, IEC 60068 and MIL-STD-810, “damp heat” is treated as an independent climatic stress. The goal is not merely to verify moisture resistance, but to accelerate and expose failure modes triggered by water adsorption, condensation, “breathing” and electrochemical migration.