Search for the product you are looking for
Combined Sulfur Dioxide Test Chamber

Combined Sulfur Dioxide Test Chamber

Product Introduction
Composite sulfur dioxide test chamber through the examination of the material and its protective layer of corrosion of the ability, as well as similar protective layer of the process quality comparison, at the same time can be assessed the ability of certain products to resist corrosion.

Service Hotline

+86 18017488690
Inquire Now Get A Quote
Product Parameter
Model Studio Size  (D*W*H)mm Dimension(D*W*H)mm
LRHS-297-RFHS02 600×550×900 Subject to contractual three-view
LRHS-605-RFHS02 850×750×950
LRHS-900-RFHS02 1000×900×1000
temperature range 25℃~60℃
Temperature uniformity ≤2℃ (at no load)
Temperature fluctuation ±0.5℃/±2℃
Humidity range 30%~98% RH
Gas generation method cylinder method
gas concentration 0.1 to 1% (% by volume)
Outer/inner case material Corrosion-resistant, anti-aging, high-strength PP reinforced rigid plastic sheet
Door Material Fully transparent high temperature resistant tempered glass, easy to observe the test samples during the test condition.
substructure Silicone rubber sealing between lid and box body to prevent gas spillage
Temperature Controller Imported “UEC” brand temperature and humidity meter
Dehumidification and cooling Single or double cascade refrigeration
Compressor Taikang, France
temperature sensor PT100 platinum resistance temperature measurement body
interrupter Schneider miniature circuit breakers (to prevent short circuits in control circuits)
standard configuration 1 set of sample holder, 1 sulfur dioxide cylinder
security protection Compressor overpressure overload, over temperature, fan motor overheating
Leakage protection, test timing, overload and short circuit protection.
Supply Voltage AC380V±10% 50Hz
Power 10.0kW 12.5kW 16.5kW
operating environment 5℃~+28℃ ≤85% RH
Note:
1、the test data are used in the ambient temperature of 25 ℃ and well ventilated conditions measured
2、The above parameters are for reference only, and can be customized according to user-specific test parameters.
3、This technical information, subject to change without notice

 

Get A Quote
Name:*
Phone:*
Email:*
Your message information:
Product Recommendation
Industry News
The ozone aging test chamber is an instrument used in the aging resistance testing process of some materials.
Salt spray test chambers evaluate the corrosion resistance of samples by exposing them to a corrosive salt mist, allowing comparison with other products. These tests can be categorized into three types
Providing a stable and continuous voltage to the constant temperature and humidity test chamber is essential for ensuring its proper operation. To achieve a stable current supply, the device's power must be correctly connected to the circuit. So, how is this done?
Telegram WhatsApp Facebook VK LinkedIn