Search for the product you are looking for
Air-exchange Aging Test Chamber

Air-exchange Aging Test Chamber

Product Introduction
Air-exchange aging test chamber for electrical insulation materials, heat resistance test, electronic parts and components, plasticized products of the air-exchange aging test, assessment and judgment of its storage and use in high-temperature ambient conditions of adaptability, the specimen in the simulation of high temperatures and atmospheric pressure in the air after the aging of the determination of its performance and performance to be compared with the performance of the non-aging samples.

Service Hotline

+86 18017488690
Inquire Now Get A Quote
Product Parameter
Model Studio Size  (D*W*H)mm Dimension(D*W*H)mm
LRHS-101-NHQ 450×450×500 730×1180×1480
LRHS-225-NHQ 500×600×750 780×1330×1730
LRHS-504-NHQ 700×800×900 1120×1430×1880
LRHS-800-NHQ 800×1000×1000 1120×1730×1980
LRHS-1000-NHQ 1000×1000×1000 1320×1730×1980
temperature range RT+10℃~200℃/ RT+10℃~300℃
Temperature uniformity ≤2%℃ (at no load)
Temperature fluctuation ±0.5℃ (at no load)
heating rate 1.0~3.0℃/min
air exchange RT+10℃~200℃ 10-200次/H
201℃~300℃ 10-150次/H
air intake and exhaust Scale Indicator, Adjustable Flip Flop
a turntable for testing specimens Two-tier stainless steel rotating rack Speed: 1~5r/min
(Customized sample racks are also available upon request)
Outer case material High quality A3 steel plate electrostatic spraying
Inner box material Imported high-grade stainless steel SUS304
Insulation material Rigid polyurethane foam + fiberglass
Other viewing window 210×275mm or 395×395mm (effective field of view)
(No observation window for test chambers above 200°C)
Temperature Controller Korea Sangwon ST590 Meter
temperature sensor PT100 platinum resistance temperature measurement body
standard configuration One set of carousel type sample holder
security protection Control line fuse, motor overheating, equipment timing, over-temperature, under-phase/reverse-phase of the whole machine
Leakage protection, power distribution control cabinet open power failure protection, automatic shutdown after fault alarms
Supply Voltage AC220V±10% 50Hz 或AC380V±10% 50Hz
Power 4.3kW/6.5kW/7.5kW/9.5kW/9.5kW
operating environment 5℃~+35℃ ≤85% RH
Note:
1、according to the user’s specific requirements for customized non-standard walk-in gas-exchange aging test chamber
2、Can be customized according to the specific requirements of the user non-standard air-exchange aging test chamber etc
3、This technical information, if there is any change without prior notice

 

Get A Quote
Name:*
Phone:*
Email:*
Your message information:
Product Recommendation
Industry News
Safety is a fundamental requirement for any equipment. When operating a thermal shock test chamber, certain safety precautions must be observed. Below is a brief introduction to key safety considerations.
High and low temperature alternating test chambers are composed of many components, each playing a critical role in the operation of the equipment. Today, we will focus on the heating element, providing a deeper understanding of this essential part of the testing device.
To meet various market demands, many types of testing chambers have been developed, among which the salt spray test chamber is one of the most common.
Telegram WhatsApp Facebook VK LinkedIn