Search for the product you are looking for
Sulfur Dioxide Test Chamber

Sulfur Dioxide Test Chamber

Product Introduction
Sulfur dioxide test chamber through the examination of the material and its protective layer of corrosion of the ability, as well as similar protective layer of the process quality comparison, at the same time, can be assessed the ability of certain products to resist corrosion.

Service Hotline

+86 18017488690
Inquire Now Get A Quote
Product Parameter
Model Studio Size  (D*W*H)mm Dimension(D*W*H)mm
LRHS-297-RS02 600×550×900 1050×1130×1500
LRHS-605-RS02 850×750×950 1300×1330×1550
LRHS-900-RS02 1000×900×1000 1450×1480×1600
temperature range RT+10℃~50℃
Temperature uniformity ≤2℃ (at no load)
Temperature fluctuation ±0.5℃(at no load)
Humidity range 85~95%RH
Gas generation method cylinder method
gas concentration 0.1 to 1.0% (% by volume)
Outer/inner case material Corrosion-resistant, anti-aging, high-strength PP reinforced rigid plastic sheet
Door Material Fully transparent high temperature resistant tempered glass, easy to observe the test samples during the test condition.
substructure Silicone rubber sealing between lid and box body to prevent gas spillage
Heating method Inner liner sink type heating method, fast warming, temperature distribution uniformity
Heating structure Adoption of far-infrared nickel-chromium alloy high-speed heating electric heater
Temperature Controller Intelligent XMT7512D Series
temperature sensor PT100 platinum resistance temperature measurement body
standard configuration 1 set of sample holder, 1 sulfur dioxide cylinder
security protection Leakage protection, short circuit protection, water shortage alarm, over-temperature protection, overall equipment timing
Supply Voltage AC220V±10% 50±0.5Hz
Power 2.0kW 2.5kW 3.0kW
operating environment 5℃~+28℃ ≤85% RH
Note:
1、the above data are in the use of ambient temperature of 25 ℃ and well ventilated conditions measured
2、Can be customized according to the specific requirements of the user non-standard sulfur dioxide test chamber etc
3、This technical information, if there is any change without prior notice

 

Get A Quote
Name:*
Phone:*
Email:*
Your message information:
Product Recommendation
Industry News
There are many important considerations when selecting and using a formaldehyde/VOC environmental test chamber. How many of these are you aware of? Today, we’ll share a few key points—have you noticed them?
High and low temperature humidity test chambers require electricity to operate, which inevitably leads to energy consumption. Saving electricity not only reduces energy waste but also lowers the operational costs of the equipment.
However, the LINPIN product series, with its various types and models of salt spray test chambers
Telegram WhatsApp Facebook VK LinkedIn