Search for the product you are looking for
Battery Test Chamber

Battery Test Chamber

Product Introduction
New energy battery test chamber, automotive battery test chamber, trolley battery test chamber is mainly used for various types of large batteries, high temperature, low temperature, hot and humid, temperature alternating cycles and other items of the long continuous test

Service Hotline

+86 18017488690
Inquire Now Get A Quote
Product Parameter
Model LRHS-6500-LHF
temperature range A:-20℃~150℃  B:-40℃~150℃  C:-60℃~150℃ D:-70℃~150℃
Temperature uniformity ≤2℃(at no load)
Temperature fluctuation ≤±0.5℃(at no load)
Humidity range 20%~98% RH
Humidity uniformity ±2.5% RH
Humidity fluctuations ±2%
heating rate 1.0~3.0℃/min
cooling rate 0.7~1.0℃/min
Time Setting Range 1~60000M
test hole Mounted on the left side of the machine for use with external test power or signal cables
viewing window 210 x 275mm or 395 x 395mm (effective field of view)
Outer case material High quality A3 steel plate electrostatic spraying
Inner box material Imported high-grade stainless steel SUS304
Insulation material Rigid polyurethane foam + fiberglass
Temperature Controller Imported “UEC” brand temperature and humidity meter
temperature sensor PT100 platinum resistance temperature measurement body
refrigeration system cascade cooling
Compressor France Tecumseh / BITZER, Germany
standard configuration 1 roll of wet bulb gauze, 2 sample racks, with condensate catch pan and drain out of the box
security protection Pressure release device, anti-spark design, smoke alarm, intake and exhaust devices,
Spraying fire extinguishing device, compressor overpressure overload, fan motor overheating, the whole machine under-phase/reverse-phase
Over-temperature, overall equipment timing, leakage protection, overload and short-circuit protection.
Supply Voltage AC380V±10% 50Hz
Power 4.0kW/5.5kW/8.5kW/11.5kW/11.5kW
operating environment 5℃~+28℃ ≤85% RH
Get A Quote
Name:*
Phone:*
Email:*
Your message information:
Product Recommendation
Industry News
The formaldehyde VOC environmental test chamber is primarily used to detect formaldehyde content in building materials, artificial panels, curtains, carpets, and other products.
The high-temperature test chamber is primarily used to examine the performance and parameters of materials under high-temperature conditions. If the chamber fails to reach the required temperature during testing, it can directly affect the experimental results.
Analysis of Fault Alarm Principles in Constant Temperature and Humidity Chambers
Telegram WhatsApp Facebook VK LinkedIn