Search for the product you are looking for
Salt Spray Test Chamber

Salt Spray Test Chamber

Product Introduction
salt spray test chamber through the assessment of the material and its protective layer of salt spray corrosion ability, as well as similar protective layer of the process quality comparison, at the same time can be assessed for certain products salt spray corrosion resistance; products for parts, electronic components, metal materials, protective layer and salt spray corrosion test of industrial products.

Service Hotline

+86 18017488690
Inquire Now Get A Quote
Product Parameter
Model Studio Size(D*W*H)mm Dimension(D*W*H)mm
LRHS-108-RJY 450×600×400 780×1140×1050
LRHS-270-RJY 600×900×500 960×1460×1150
LRHS-412-RJY 750×1100×500 1100×1730×1240
LRHS-663-RJY 850×1300×600 1230×2150×1410
LRHS-816-RJY 850×1600×600 1230×2450×1460
LRHS-1080-RJY 900×2000×600 1280×2850×1460
Temperature range RT+5℃~55℃
Saturated drum temperature RT+10℃~70℃
Temperature uniformity ≤2℃
Temperature fluctuation ±0.5℃
Salt spray deposition 1~2ml/80 cm².h(16 Hourly average)
Compressed air pressure 2.00±0.01(kg/cm²)
Spraying method Continuous/Periodic Optional
Test time 1~9999 H、M、S(tunable)
Cycle time 1~99 H、M、S(tunable)
Specimen holder angle 20±5°
Test Methods NSS test, AASS test, CASS test
Case Material Corrosion-resistant, high-strength, anti-aging, high-temperature resistant PP reinforced rigid plastic sheet
Lid Material Corrosion-resistant, high-strength, anti-aging, high-temperature resistant PP reinforced rigid plastic sheet
Air-saturated drum Imported high grade stainless steel SUS304
Pressurized Air Hose Material High quality rubber hose
Other pipelines Thickened Fluorosilicone Rubber Tube
Temperature Controller Adopting Japan “UMC” brand temperature meter
Temperature Sensor PT100 Platinum resistance thermometer
Heater Titanium Heating Tube
Interrupter Schneider miniature circuit breakers (to prevent short circuits in control circuits)
Standard Configuration V-shaped sample holders, round rods, nozzles, funnels, metering cylinders, mist evacuation tubes
Safety Overall equipment under-phase/reverse-phase, equipment timing, rapid fogging instructions, over-temperature, end of test, low water level protection, leakage, short-circuit
Supply Voltage AC220V±10% 50HZ AC380V±10% 50Hz
Power 1.6kW/2.5kW/3.0kW/5.6kW/6.5kW/6.7kW
Operating environment 5℃~+28℃ ≤85% RH
Note:
1、 the above data are in the use of ambient temperature of 25 ℃ and well ventilated conditions measured
2、Can be customized according to the user’s specific test requirements of the user non-standard Intelligent salt spray test chamber etc.
3、This technical information, subject to change without notice

 

Get A Quote
Name:*
Phone:*
Email:*
Your message information:
Product Recommendation
Industry News
Calibrating the temperature of a constant temperature and humidity test chamber is a preparatory task before testing. So, how can you ensure proper calibration of the test equipment? Only after adjusting the temperature of the chamber can testing proceed normally.
Today, we are proud to introduce one of Linpin’s flagship products—the Thermal Shock Test Chamber, your ideal partner for precision testing. Our product stands out with its exceptional heat storage and cold storage capabilities, enabling it to withstand extreme temperature fluctuations instantly while accurately measuring the data you need.
The high and low temperature test chamber is a large, high-precision testing instrument.
Telegram WhatsApp Facebook VK LinkedIn