EN
中文 Pусский Tiếng Việt ภาษาไทย پاکستانی زبان
Linpin Instruments EN
Search for the product you are looking for
Hot search
Constant Temperature And Humidity Test Chamber Walk-in High and Low Temperature Test Chamber
Press Enter to search
HAST Test Chamber

HAST Test Chamber

Product Introduction
The purpose of HAST test chamber, PCT test chamber, unsaturated accelerated life test chamber is to improve the environmental stress (e.g., temperature) and the working stress (voltage applied to the product, load . etc.), accelerate the test process, shorten the product or system life test time, used to investigate and analyze when the electronic components, and mechanical parts of the wear and life of the problem, the service life of the failure distribution function in what shape, as well as to analyze the failure rate.

Service Hotline

+86 18017488690
Inquire Now Get A Quote
Location：Home > Products > HAST Test Chamber
Product Parameter
Model Studio Size  (D*W*H)mm Dimension（D*W*H）mm
LRHS-45Z-HAST ∅450×500 约1600×950×1600
temperature range 105℃～143℃
Humidity range 75%RH ～100%RH
Pressure range 0.02 M pa to 0.196 M pa (gauge pressure)
0.2kg/cm2 to 1.96kg/cm2(gauge pressure)
control accuracy Temperature: ±0.3°C / Humidity: ±3.0%.
heating time Room temperature～130℃/85%RH about 100 minutes
Outer case material SUS#304 high tensile stainless steel plate, and through the multi-layer film free layer surface treatment
Inner box material SUS#316 Heat resistant and cold resistant stainless steel plate
Insulation material High Density Glass Wool
heaters Electric heater made of 316 stainless steel
Heating systems Electric heater made of 316 stainless steel
security protection Over-temperature, fan motor overheating, leakage protection, overall equipment timing and short-circuit protection
Supply Voltage AC220V±10% 50±0.5Hz
operating environment 5℃～＋35℃ ≤85% RH
Note:
1、the above data are measured in the use of ambient temperature of 25 ℃ and well-ventilated conditions
2、Can be customized according to the specific requirements of the user non-standard HAST test chamber etc
3、This technical information is subject to change without prior notice.

 

Get A Quote
Name：*
Phone：*
Email：*
Your message information：
Product Recommendation
Airbag Ignition Test Chamber
Airbag Ignition Test Chamber
Rotary Table Test Chamber
Rotary Table Test Chamber
Low Temperature Test Chamber
Low Temperature Test Chamber
Fiberglass composite salt spray test chamber
Fiberglass composite salt spray test chamber
Walk-in Temperature and Humidity Chamber
Walk-in Temperature and Humidity Chamber
Industry News
How to Choose the Right High-Low Temperature Test Chamber?
As a precision testing instrument, the high-low temperature test chamber is designed to evaluate how products withstand changes in environmental temperature and humidity.
How to Choose the Right High-Low Temperature Test Chamber?
The Differences Between a Walk-In Dust and Sand Test Chamber and an IP56X Dust and Sand Chamber
Walk-in dust and sand test chambers are designed to simulate natural sandstorm conditions to test the protective performance of large equipment, while IP56X dust and sand chambers focus on shell sealing detection and are suitable for small and medium-sized electronic and electrical products.
The Differences Between a Walk-In Dust and Sand Test Chamber and an IP56X Dust and Sand Chamber
How to Handle Interruptions During Sand and Dust Test Chamber Operation
Door locks, headlights, electrical dust covers, instrument panels, and other components can be tested for dust resistance using a sand and dust test chamber.
How to Handle Interruptions During Sand and Dust Test Chamber Operation
Follow WeChat

Copyright © 2025 Shanghai Linpin Instrument Co., Ltd Copyright

 | ICP Number：Shanghai ICP Record No. 12029585-7

 | Sitemap

Telegram WhatsApp Facebook VK LinkedIn