Search for the product you are looking for
Wind power rotor test chamber

Wind power rotor test chamber

Product Introduction
Wind power rotor test chamber is aviation, automotive, home appliances, scientific research and other fields of essential test equipment for testing and determining electrical, electronic and other products and materials for high temperature, low temperature, alternating humidity and heat or constant test of the temperature environment after the change of parameters and performance.

Service Hotline

+86 18017488690
Inquire Now Get A Quote
Product Parameter
Model LRHS-6400A-LJS
Studio Size  (D*W*H)mm 1600×2000×2000(D*W*H)mm
Dimension(D*W*H)mm 2450×2400×3120(D*W*H)mm
temperature range 0℃~40℃
Humidity range 10%~98% RH
Temperature uniformity ≤2℃ (at no load)
Humidity uniformity +2% -3% RH (at no load)
Temperature fluctuation ±0.5℃ (at no load)
Humidity fluctuation ±2%RH (at no load)
temperature deviation ±2℃ (at no load)
Humidity Deviation >75%RH ±2.5%RH <75%RH ±5%RH
cooling rate 1℃~3℃/min(average throughout)
heating speed 1℃~3℃/min(average throughout)
Time Setting Range 1~60000M
Power consumption 32.0kW
Outer case material High-quality cold-rolled steel plate, surface plastic spraying treatment
Inner box material Imported high-grade stainless steel SUS304
Insulation material Rigid polyurethane foam + fiberglass
Temperature Controller Imported “UEC” brand temperature and humidity meter
Supply Voltage AC380V±10% 50Hz
Note:
1、the test data are used in the ambient temperature of 25 ℃ and well ventilated conditions measured
2、Can be customized according to the specific requirements of the user non-standard wind power rotor test chamber etc
3、This technical information, subject to change without notice
Get A Quote
Name:*
Phone:*
Email:*
Your message information:
Product Recommendation
Industry News
To ensure that the sand and dust test chamber can quickly start the testing process, the preliminary preparations must be thorough.
A high and low-temperature test chamber is designed to simulate natural climatic conditions to test the high- and low-temperature resistance of products or materials under alternating temperature changes.
A low-temperature test chamber can accommodate multiple test specimens, but are there specific requirements regarding the location and quantity of test points? Today, we will introduce the guidelines for test point placement and quantity in such equipment.
Telegram WhatsApp Facebook VK LinkedIn