Search for the product you are looking for
Sunlight Simulation Test Chamber

Sunlight Simulation Test Chamber

Product Introduction
Sunlight simulation test chamber is used to test the aging performance of complete set of components or the whole vehicle under sunlight irradiation, including shape, color, gloss, feel, strength and various thermal expansion results.

Service Hotline

+86 18017488690
Inquire Now Get A Quote
Product Parameter
Model Studio Size  (D*W*H)mm Dimension(D*W*H)mm
LRHS-1584B-SN 1200×1100×1200 2150×1340×2750
irradiated area 1000mm×1000mm
radiation intensity ≥1000W/m2(55W/m2~1200W/m2 program classification)
Irradiance deviation ≤±10%(at a distance of not less than 0.76 m from the radiation lamp)
Power value of irradiation intensity 55W/m² ~1120W/m²(adjustable)
Distance from anticondensation filter system to sample 450~1150mm(Distance adjustable)
temperature range -40℃~+100℃(without light)、-20℃~+100℃(with light)
Temperature uniformity ≤2.0℃  (at no load)
Temperature fluctuation ≤±0.5℃(without light) 、≤±1℃(with light)
heating rate -40℃~+100℃,average rate 3℃/min
cooling rate +100℃~-40℃,average rate 3℃/min
Dew point temperature range +5°C to 87°C (without light), +5°C to +74°C (with light);
Outer case material Double-sided galvanized high-quality cold-rolled steel plate, surface electrostatic spray treatment, plate thickness t=1.5mm
Inner box material Stainless steel plate (SUS304-CP 2B ground), plate thickness t=1.0mm
Insulation material 120mm rigid polyurethane foam insulation layer
Controller Taiwan “Wyland” temperature and humidity controller (7.0 inches, high-definition true color “TFT” LCD touch screen)
refrigeration system France “Taikang” hermetic air-cooled compressor refrigeration method
temperature sensor High Accuracy Pt100 Platinum Resistance Temperature Sensors
Humidity Sensor Highly accurate Vaisala capacitive humidity sensors from Finland
lighting system German original imported “OSRAM” short arc xenon lamps
radiation meter Sunlight intensity meter imported from Japan
security protection Compressor low pressure/overload/high pressure alarm, hydrogen/oxygen/soot concentration alarm, fan overload, system abnormality alarm, emergency stop switch, water shortage, short-circuit, phase shortage, over-temperature and other protections
Supply Voltage AC380V±10% 50Hz
Power 24.5kW
Get A Quote
Name:*
Phone:*
Email:*
Your message information:
Product Recommendation
Industry News
Therefore, it is essential to pay attention to these details when using a high and low temperature humidity test chamber.
Most temperature cycling test chambers on the market feature an inner chamber made of stainless steel. However, after prolonged use, rust may still appear on the equipment. Why does this happen, and are there effective ways to prevent it?
In the components of high and low temperature test chambers, separators are essential.
Telegram WhatsApp Facebook VK LinkedIn