Search for the product you are looking for
Photovoltaic wet freezing test chamber

Photovoltaic wet freezing test chamber

Product Introduction
Photovoltaic wet freezing test chamber is used to test the material structure or composite material, in an instant by the extremely high temperature and very low temperature of the continuous environment can endure the degree of the test specimen can be detected in the shortest possible time due to thermal expansion and contraction of the chemical changes caused by or physical damage.

Service Hotline

+86 18017488690
Inquire Now Get A Quote
Product Parameter
Model Studio Size  (D*W*H)mm Dimension(D*W*H)mm
LRHS-6500-LHF 1600 x 1400 x 2900 (eight components) 3900×1750×3300
temperature range -50℃~+120℃
Temperature fluctuation ≤±0.5℃
Temperature uniformity ≤2.0℃
temperature deviation ≤±2.0℃
Humidity range 30%~98%RH
Sample Temperature Control Rate -40°C to 0°C ≥ 3.33°C/min (linear, full load, energized) ≥ 1.66°C/min (linear, full load, energized) for the rest of the temperature range
Outer case material High-quality cold-rolled steel plate, surface plastic spraying treatment
Inner box material Stainless steel plate SUS304
Insulation material Rigid polyurethane (PU) foam
controllers Japan “UEC” brand temperature and humidity meter, 7-inch high-definition true color LCD touch screen display
Refrigeration compressors BITZER, Germany
Cooling method Two-machine cascade refrigeration
Temperature and humidity sensors High Accuracy Pt100 Platinum Resistance Temperature Sensors
security protection Compressor overpressure/overload, fan motor overload, overall equipment timing, over-temperature, water shortage, short circuit, phase loss, leakage and other protection
Supply Voltage AC380V±10% 50Hz
Power 110.0kW
Note:
1、 the above data are measured in the use of ambient temperature of 25 ℃ and well-ventilated conditions
2、Can be customized according to the specific requirements of the user non-standard Photovoltaic wet freezing test chamber etc
3、This technical information is subject to change without prior notice.
Get A Quote
Name:*
Phone:*
Email:*
Your message information:
Product Recommendation
Industry News
Rain test chamber is a test instrument to test whether the waterproof is good, the figure of this equipment can be said to be everywhere, applied in various places. Small to our usual use of cell phones, flashlights and other lighting apparatus; large to the aerospace industry, lighting systems, signaling device testing and so on. Waterproof has always been a lot of industry can not get around a topic, a lot of equipment once the rain and other wet, its service life will be greatly reduced, this equipment in the waterproof performance test link plays a vital role.
Safety for any test chamber is very important, now the equipment are set up to protect the measures, in addition to these self-protection warning, in the usual use of equipment in the process also need to pay attention to the following points.
By subjecting products to various temperature environments—such as high temperature, low temperature, and alternating humidity—constant temperature and humidity test chambers can evaluate the heat resistance, cold resistance, dryness resistance, and moisture resistance of materials under different climatic conditions.
Telegram WhatsApp Facebook VK LinkedIn