Search for the product you are looking for
Low Temperature Test Chamber

Low Temperature Test Chamber

Product Introduction
Low temperature test chamber is aviation, automotive, home appliances, scientific research and other fields of essential test equipment for testing and determining electrical, electronic and other products and materials for high temperature, low temperature, or constant test temperature environment after the change of parameters and performance.

Service Hotline

+86 18017488690
Inquire Now Get A Quote
Product Parameter
Model Workshop size(D*W*H) mm External Dimension(D*W*H)mm
LRHS-101B-LD 450×450×500 1160×1000×1610
LRHS-225B-LD 500×600×750 1210×1150×1870
LRHS-504B-LD 700×800×900 1260×1340×2070
LRHS-800B-LD 800×1000×1000 1370×1550×2170
LRHS-1000B-LD 1000×1000×1000 1560×1550×2170
temperature range A:-20℃~RT B:-40℃~RT C:-60℃~RT D:-70℃~RT
Temperature uniformity ≤2℃ (at no load)
Temperature fluctuation ±0.5℃(at no load)
heating rate 1.0~3.0℃/min
cooling rate 0.7~1.0℃/min
Time Setting Range 1~9999H
test hole Mounted on the left side of the machine for use with external test power or signal cables
viewing window 210 x 275mm or 395 x 395mm (effective field of view)
Outer case material High quality A3 steel plate electrostatic spraying
Inner box material Imported high-grade stainless steel SUS304
Insulation material Rigid polyurethane foam + fiberglass
Temperature Controller Korea Sangwon ST590 Meter
temperature sensor PT100 platinum resistance temperature measurement body
Cooling method Single or double cascade refrigeration
Compressor Tycon Compressors
standard configuration Sample racks, 2 tiers, with condensate catch pan and drain out of the box
security protection Compressor overpressure overload, fan motor overheating, equipment phase failure/reverse phase
Over-temperature, overall equipment timing, leakage protection, overload and short-circuit protection
Supply Voltage AC380V±10% 50Hz
Power (A)3.5kW/4.0kW/6.0kW/8.0kW/9.0kW
(B)4.0kW/4.5kW/7.5kW/9.0kW/10.5kW
(C)4.5kW/6.5kW/9.0kW/13.0kW/13.0kW
operating environment 5℃~+28℃ ≤85% RH
Note:
1、 the above data are in the use of ambient temperature of 25 ℃ and well ventilated conditions measured
2、Can be customized according to the specific requirements of the user non-standard Low temperature test chamber etc
3、This technical information, subject to change without notice

 

Get A Quote
Name:*
Phone:*
Email:*
Your message information:
Product Recommendation
Industry News
Calibrating the temperature of a constant temperature and humidity test chamber is a preparatory task before testing. So, how can you ensure proper calibration of the test equipment? Only after adjusting the temperature of the chamber can testing proceed normally.
Nowadays, low-temperature test chambers are increasingly used across various industries—not just for research and experiments but also for testing many everyday products. Today, we’ll share some important precautions. Only by using the equipment correctly can accurate results be obtained, and only by handling it with care can it serve us better.
The performance indicators of a high and low temperature test chamber are crucial because they directly affect the reliability of test results, the breadth of application scenarios, and the effectiveness of quality assurance for products.
Telegram WhatsApp Facebook VK LinkedIn