Walk-in Rain Test Chamber

Product Introduction

walk-in rain test chamber is suitable for testing the waterproof sealing of outdoor motorized trains. Through the waterproof test chamber, the water sealing status of motorized trains is confirmed by making the conditions of the rain test similar to the natural state outside, and structural improvements are made to the parts that may leak rain.

Service Hotline

+86 18017488690

Inquire Now Get A Quote

Location：Home > IP protection testing equipment > Walk-in Rain Test Chamber

Product Parameter

Studio Size (DWH)mm	7000×4000×4000（DWH）mm
Hole Diameter	Φ2.5—3.0mm
spraying density	550×550mm
water jet pressure	150±10KPa
Sprinkler Pipe Diameter	Depending on the flow rate
Pressure	Class 1.5 accuracy manometer, dial #100, 0 to 6kg/cm², with pressure sensor
flow meter	Electromagnetic flow meter
rain gauge	Depending on the flow rate
standard configuration	Water pumps, sewage pumps, filters
shower duration	Arbitrary Adjustment
Supply Voltage	AC380V±10% 50Hz
Upper front enclosure	6mm±1mm/min
Side & Top	8mm±1mm /min
other	One IPX5, one IPX6 printhead each
Note: 1、 the above data are in the use of ambient temperature of 25 ℃ and well ventilated conditions measured 2、Can be customized according to the specific requirements of the user non-standard Walk-in rain test chamber etc 3、This technical information, if there is any change without prior notice

Get A Quote

Product Recommendation

Constant temperature water immersion test chamber

Salt Spray Corrosion Test Chamber

Low Temperature Test Chamber

Waterproof Test Chamber

High and Low Temperature Low Pressure Test Chamber

Industry News

These 4 faults of the sand and dust test chamber can be resolved using the following methods

Any sand and dust test chamber may encounter malfunctions during use. Today, we will share solutions for the following 4 common faults.

How to Set the Test Temperature for a Super Low Temperature Test Chamber

A super low temperature test chamber is a device used to simulate the performance and reliability of products under low-temperature conditions.

Is the automatic water replenishment function necessary for high and low temperature humidity test chambers?

If the high and low temperature humidity test chamber is used frequently and for a long time, the water in the equipment's water tank may not be sufficient to complete the test.