Search for the product you are looking for
Sand and Dust Test Chamber

Sand and Dust Test Chamber

Product Introduction
Sand and dust test chamber is suitable for testing the sealing performance of the shell of the product, mainly used for the shell protection level standard stipulated in the IP5X and IP6X two levels of test.

Service Hotline

+86 18017488690
Inquire Now Get A Quote
Product Parameter
Model Studio Size  (D*W*H)mm Dimension(D*W*H)mm
LRHS-512-PS 800×800×800 1300×1050×1750
LRHS-800-PS 800×1000×1000 1300×1250×1950
LRHS-1000-PS 1000×1000×1000 1600×1250×1980
LRHS-1500-PS 1000×1500×1000 1600×1750×1980
Time Setting Range 1~9999H  adjustable
air velocity Not more than 2m/s
Dust blowing method Continuous and periodic dust blowing at any time setting
sand and dust concentration 2~4kg/m³
Test dust Drying talcum powder, silicate cement, chimney ash, etc.
Vacuum pump flow control 60~600L/H
Dust dehumidification Electrically heated heating and dehumidification
Vibration time 1S-99H  adjustable
Dust blowing time 1S-99H  adjustable
recurring cycle Dust blowing time, stop time and total time can be set arbitrarily.
viewing window 395×395mm(Effective vision)
Outer case material High quality A3 steel plate electrostatic spraying
Inner box material Imported high-grade stainless steel SUS304
Temperature Controller “Taiwan Weilun” 7.0-inch color touch instrumentation
standard configuration 1 layer of sample rack, 1 scraper, 100g of talcum powder
Optional accessories Vacuum system: rotary vane vacuum pump (equipped with vacuum piping device)
security protection Fan motor overheating, the overall equipment phase / reverse phase, leakage protection
Test timing, overload and short-circuit protection, automatic shutdown after fault alarms
Supply Voltage AC380V±10% 50Hz
Power 0.9kW/0.9kW/1.2kW/1.2kW
operating environment 5℃~+28℃ ≤85% RH
Note:
1、Can be customized according to the specific requirements of the user non-standard sand and dust test chamber etc
2、This technical information, if any change without notice

 

Get A Quote
Name:*
Phone:*
Email:*
Your message information:
Product Recommendation
Industry News
We’ve previously shared many articles about aging test chambers, covering topics such as pricing, structure, and usage. Today, let’s focus on the raw materials used in manufacturing these devices.
To ensure that the sand and dust test chamber can quickly start the testing process, the preliminary preparations must be thorough.
During the transportation of a thermal shock test chamber, technicians often remind operators to keep the equipment as level as possible to avoid oil blockage.
Telegram WhatsApp Facebook VK LinkedIn