EN
中文 Pусский Tiếng Việt ภาษาไทย پاکستانی زبان
Linpin Instruments EN
Search for the product you are looking for
Hot search
Constant Temperature And Humidity Test Chamber Walk-in High and Low Temperature Test Chamber
Press Enter to search
Walk-in Condensation Test Chamber

Walk-in Condensation Test Chamber

Product Introduction
Walk-in condensation test chamber, condensation test chamber is Lin Frequency Instruments in accordance with DIN EN ISO6270-2, DIN 50018 and other corresponding standards for the manufacture of environmental testing equipment, equipment can be 100% humidity test, and at the same time can realize the low temperature, high temperature, humidity in one of the integrated test, used in aerospace and aviation, quality inspection colleges and universities, new materials, automotive electronics and other industries.

Service Hotline

+86 18017488690
Inquire Now Get A Quote
Location：Home > Non standard customized laboratory > Walk-in Condensation Test Chamber
Product Parameter
Model Studio Size  (D*W*H)mm Dimension（D*W*H）mm
LRHS-2000-LN 1000×2000×1000 Subject to contractual three-view
LRHS-4000-LN 2000×2000×1000
LRHS-6000-LN 2000×3000×1000
LRHS-8000-LN 2000×2000×2000
temperature range 25℃～45℃
Humidity range 100% RH
Humidity Deviation +2、-3% RH
heating rate The air temperature inside the box reaches 40℃ for less than 90 minutes.
Time Setting Range 1～60000M
User Environmental Requirements Ambient temperature should be controlled at 23±5℃, humidity ≤75%RH or less
viewing window 395×395mm(Effective vision)
Outer case material High quality A3 steel plate electrostatic spraying
Inner box material Imported high-grade stainless steel SUS304
Insulation material Rigid polyurethane foam + fiberglass
Temperature Controller Imported “UEC” brand temperature and humidity meter
overtemperature protector Korea RAINBOW
temperature sensor PT100 platinum resistance temperature measurement body
security protection Over-temperature, fan motor overheating, overall equipment phase failure/reverse phase
Test timing, leakage protection, water shortage and short circuit protection
Supply Voltage AC380V±10% 50±0.5Hz
Power 7.5kW/11.0kW/15.0kW/20.0kW
Note:
1、the test data are used in the ambient temperature of 25 ℃ and well ventilated conditions measured
2、Can be customized according to the specific requirements of the user non-standard walk-in condensation test chamber etc
3、This technical information, subject to change without notice

 

Get A Quote
Name：*
Phone：*
Email：*
Your message information：
Product Recommendation
Electrical Component Aging Chamber
Electrical Component Aging Chamber
High and Low Temperature Alternating Humidity Test Chamber
High and Low Temperature Alternating Humidity Test Chamber
Airbag Ignition Test Chamber
Airbag Ignition Test Chamber
Military Standard Rain Test Chamber
Military Standard Rain Test Chamber
UV Aging Simulation Test Chamber
UV Aging Simulation Test Chamber
Industry News
The Importance of Sealing for High and Low Temperature Alternating Test Chambers
Previously, we discussed several factors that affect the test results of high and low temperature alternating test chambers. One critical factor is the sealing performance of the equipment, as poor sealing can lead to the following issues
The Importance of Sealing for High and Low Temperature Alternating Test Chambers
How to Purchase a Cold and Hot Shock Test Chamber That Meets Your Needs
Cold and hot shock test chambers utilize high-temperature and low-temperature zones during testing. In the testing process, two-box models involve placing the test product in high and low-temperature zones for cyclic exposure, while three-box models involve blowing high- and low-temperature gases onto the product alternately.
How to Purchase a Cold and Hot Shock Test Chamber That Meets Your Needs
What to Consider When Purchasing a High-Temperature Test Chamber?
When considering the purchase of a high-temperature test chamber for experiments, you may have concerns about the brand and model specifications.
What to Consider When Purchasing a High-Temperature Test Chamber?
Follow WeChat

Copyright © 2025 Shanghai Linpin Instrument Co., Ltd Copyright

 | ICP Number：Shanghai ICP Record No. 12029585-7

 | Sitemap

Telegram WhatsApp Facebook VK LinkedIn