Search for the product you are looking for
Water-Cooled Xenon Lamp Weathering Test Chamber

Water-Cooled Xenon Lamp Weathering Test Chamber

Product Introduction
Water-cooled xenon lamp weathering test chamber can simulate the full sunlight spectrum of the xenon arc lamp to reproduce the destructive light waves that exist in different environments, can be used for scientific research, product development and quality control to provide the appropriate environmental simulation and light accelerated aging test.

Service Hotline

+86 18017488690
Inquire Now Get A Quote
Product Parameter
Model Studio Size  (D*W*H)mm Dimension(D*W*H)mm
LRHS-767S-SN 950×950×750 1560×1500×1730
temperature range RT+10℃~80℃
Humidity range 65%~98%RH
Blackboard temperature 63℃~100℃
Temperature uniformity ≤2.0℃(in darkness)
Temperature fluctuation ±0.5℃(in darkness)
Humidity Deviation +2、-3% RH
Nozzle Aperture Ф0.8mm
rainfall pressure 0.12~0.15Mpa
timing of rainfall 1~999M,Adjustable for continuous rainfall
Spraying cycle 18min/102min或12min/48min(Spraying time/stopping time)
photoperiod 1~999h、m、scontinuously adjustable
sample holder 360°rotation, rotation rate 1r~5r/min
template 75×150mm(standard samples, customizable)
longitudinal 290~800nm
radiation intensity ≤1200W/㎡
Xenon lamp power 6.0kW
Heating power 4.0kW
Humidifying power 3.0kW
Outer case material High quality A3 steel plate electrostatic spraying
Inner box material Imported high-grade stainless steel SUS304
Temperature and humidity controller “Taiwan Weilun” touch screen + ‘Germany Siemens’ PLC module
Temperature and humidity sensors PT100 platinum resistance temperature measurement body
standard configuration 2 lamps, 1 set of sample holders
security protection Compressor overpressure overload, water shortage protection, fan motor overheating, the overall equipment over temperature
The whole machine under phase/reverse phase, equipment timing, leakage protection, automatic shutdown after fault alarm and other protection.
Supply Voltage AC380V±10% 50Hz
Power 15.0kW
operating environment 5℃~+30℃ ≤85%RH
Note:
1、the test data are used in the ambient temperature of 25 ℃ and well ventilated conditions measured
2、Can be customized according to the specific requirements of the user non-standard water-cooled xenon lamp weathering test chamber etc
3、This technical information, subject to change without notice

 

Get A Quote
Name:*
Phone:*
Email:*
Your message information:
Product Recommendation
Industry News
In the market, thermal shock test chambers come in two types: two-chamber and three-chamber designs. Some customers may wonder which type to choose—can they opt for a three-chamber model?
If your salt spray test chamber experiences spray failure, the issue may be a clogged nozzle. So, how should you handle nozzle clogging? Here’s a clever trick from our experts—a simple guide on how to resolve nozzle blockages in testing equipment.
The uniformity of a thermal shock test chamber directly affects the test results, so it is crucial to maintain optimal uniformity.
Telegram WhatsApp Facebook VK LinkedIn