Search for the product you are looking for
Ultraviolet Pre-treatment Machine

Ultraviolet Pre-treatment Machine

Product Introduction
Ultraviolet pre-treatment machine is mainly used for photovoltaic industry and a series of photovoltaic components for temperature, light and other environmental changes in the parameters and performance.

Service Hotline

+86 18017488690
Inquire Now Get A Quote
Product Parameter
Model Studio Size  (D*W*H)mm Dimension(D*W*H)mm
LRHS-5980-NGF 2300×1300×2000 Approx. 2800 x 2500 x 2400
Effective irradiance area 2000mm×1000mm
Light intensity range 150~250W/m2
spectral range 280~400nm
UVB/(UVA+UVB) 3~10%
inhomogeneity ≤±15%
Sample temperature range 60±5℃
Sample temperature uniformity ≤±5℃
Outer case material 1.2mm Cold rolled steel plate with plastic spraying on both sides
Inner box material 1.0mm thick SUS304 stainless steel, sunlight simulating fully reflective reflective film mounted on the side wall for secondary sealing and optical reflection control.
Insulation material 10mm Thickness High Quality Insulation Material
Controller Siemens PLC Module + Touch Screen
Cooling method Air-cooled/water-cooled refrigeration
Compressor Taikang, France
Heating method Nickel-chromium alloy electric wire type heater
standard configuration UV probes, temperature sensors, lights, lead holes, etc.
security protection Emergency stop button, sample surface temperature is too high, light source system fault alarm, power supply phase/undervoltage/overvoltage/leakage protection, fan overload, compressor overvoltage/overheat/overcurrent, heating wire over-temperature protection
Supply Voltage AC380V±10% 50Hz
Power 20.0kW
operating environment 5℃~+35℃ ≤75% RH
Note:
1、 the above data are measured in the use of ambient temperature of 25 ℃ and well-ventilated conditions
2、Can be customized according to the user’s specific test requirements.
3、This technical information is subject to change without prior notice.

 

Get A Quote
Name:*
Phone:*
Email:*
Your message information:
Product Recommendation
Industry News
If an aging test chamber generates static electricity, it can not only affect the test results but may also cause malfunctions or even fires. So, how can we ensure that the test equipment remains free of static electricity?
The constant temperature and humidity test chamber, also known as a constant temperature and humidity tester, constant temperature and humidity experimental box, constant temperature machine, or constant temperature and humidity box, is a device used to test the performance of materials under various environmental conditions and to evaluate their resistance to heat, cold, dryness, and humidity.
After long-term use, components or systems of a high-low temperature and humidity test chamber may encounter certain issues.
Telegram WhatsApp Facebook VK LinkedIn