Search for the product you are looking for
Walk-in Low Temperature Test Chamber

Walk-in Low Temperature Test Chamber

Product Introduction
Walk-in low temperature test chamber is aviation, automotive, home appliances, scientific research and other fields of essential test equipment for testing and determining electrical, electronic and other products and materials for low-temperature or constant test temperature environment after the change of parameters and performance.

Service Hotline

+86 18017488690
Inquire Now Get A Quote
Product Parameter
Model Studio Size  (D*W*H)mm Dimension(D*W*H)mm
LRHS-8MB-LD 2000×2000×2000 Subject to contractual three-view
LRHS-15MB- LD 2500×3000×2000
LRHS-30MB- LD 3000×5000×2000
LRHS-60MB- LD 5000×6000×2000
temperature range A:-20℃~RT      B:-40℃~RT      C:-60℃~RT      D:-70℃~RT
Temperature uniformity ≤2℃ (at no load)
Temperature fluctuation ±0.5℃(at no load)
Time Setting Range 1~60000M
cooling rate RT~-40℃≤30min
Outer case material High-quality library board, CNC finishing
Inner box material Imported high-grade stainless steel SUS304
Insulation material Rigid polyurethane foam + fiberglass
Temperature Controller Imported “UEC” brand temperature and humidity meter
temperature sensor PT100 platinum resistance temperature measurement body
Cooling method Single or double cascade refrigeration
compactors Tycon (France) / BITZER (Germany)
standard configuration Emergency stop switch, three-color indicator light
security protection Compressor overpressure overload, over temperature, fan motor overheating, leakage protection
Overall equipment phase/reverse phase, test timing, overload and short-circuit protection
Supply Voltage AC380V±10% 50Hz
Power (A)17.0kW/27.5kW/42.0kW/56.0kW
(B)20.0kW/34.5kW/50.5kW/68.5kW
(C)29.5kW/43.5kW/58.0kW/75.0kW
operating environment 5℃~+28℃ ≤85% RH
Note:
1、the test data are used in the ambient temperature of 25 ℃ and well ventilated conditions measured
2、Can be customized according to the specific requirements of the user non-standard walk-in low temperature test chamber etc
3、This technical information, subject to change without notice

 

Get A Quote
Name:*
Phone:*
Email:*
Your message information:
Product Recommendation
Industry News
If the temperature recovery time falls outside the specified range, it can affect the test results of the thermal shock chamber. To routinely test the temperature recovery time of the equipment, you can follow the steps below.
With the rapid development of industrial production, temperature and humidity test chambers have become essential equipment for simulating external climatic conditions.
Formaldehyde VOC environmental test chamber, also known as formaldehyde emission testing chambers, are large-scale testing equipment primarily used to simulate standard climatic conditions for measuring the release of formaldehyde from indoor decoration and renovation materials.
Telegram WhatsApp Facebook VK LinkedIn