The ozone aging test chamber, also known as the ozone aging test machine, is used for rubber products such as vulcanized rubber, thermoplastic rubber, cable insulation sheaths, etc. These products are subjected to static tensile deformation and exposed to a constant temperature environment in a sealed, light-free chamber with a constant ozone concentration. After a predetermined period of testing, the degree of cracking on the surface of the test samples or other changes in performance are used to assess the ozone resistance of the rubber. The test samples are tested in a sealed chamber with constant ozone concentration and temperature for a specified period of time.
Working Principle of Ozone Aging Test Chamber
Ozone in the atmosphere is present in very small amounts but is a major factor in the cracking of rubber. The ozone aging chamber simulates and intensifies the ozone conditions in the atmosphere to study the effects of ozone on rubber. It provides a rapid method for identifying and evaluating the performance of ozone-resistant rubber and the effectiveness of anti-ozone protection measures, thereby extending the service life of rubber products.
Technical Parameters of Ozone Aging Test Chamber
Temperature Range: 0℃～70℃
Humidity Range: ≥65% RH
Ozone Concentration: 0～200PPm, 0～500PPm
Temperature Fluctuation: ±0.5℃
Note: The salt spray test chamber is suitable for testing the ozone resistance and anti-ozone cracking properties of vulcanized rubber or thermoplastic rubber under static or dynamic tensile strain conditions. The test is conducted in an environment with a specified temperature and not directly exposed to light. The ozone resistance of different rubber materials varies significantly with different ozone concentrations and temperatures. The degree of damage to products under tensile strain in ozone tests and use also varies greatly depending on size, type, and strain magnitude.
Standards Implemented by Ozone Aging Test Chamber
JIS K6259-2004 Determination of Ozone Resistance of Vulcanized Rubber and Thermoplastic Rubber
ASTM_D1171-2007 Rubber Aging Test Method (Ozone Surface Cracking in Outdoor or Aging Chamber)
ASTM1149
GBT 7762-2014 /SO1431/ DIN53509/ Static Tensile Test for Ozone Resistance of Vulcanized Rubber or Thermoplastic Rubber GB7762-2003 Static Tensile Test Method for Ozone Aging of Vulcanized Rubber
GBT2951.21-2008/IEC60811-2-1-2001 Ozone Resistance Test
GJB1217-91 Test Method for Ozone Aging Test Chamber
GBT 13642-1992 Dynamic Tensile Test Method for Ozone Aging of Vulcanized Rubber
Temperature and humidity test chamber Salt spray test chamber Aging test chamber New Energy Test Chamber IP protection testing equipment Non standard customized laboratory High and Low Temperature Test Chamber Thermal Shock Test Chamber Constant Temperature and Humidity Test Chamber High and Low Temperature Low Pressure Test Chamber Salt Spray Test Chamber Rapid Temperature Change Test Chamber High and Low Temperature Alternating Humidity Test Chamber High and Low Temperature Humidity Test Chamber Low Temperature Test Chamber High Temperature Test Chamber High and Low Temperature Alternating Test Chamber Damp heat test chamber for antirust oil and grease UV Aging Test Chamber Ozone Aging Test Chamber Air-exchange Aging Test Chamber Rain Test Chamber Sand and Dust Test Chamber Sulfur Dioxide Test Chamber Mold Test Chamber Ultra-Low Temperature Test Chamber Salt Spray Corrosion Test Chamber Condensation Test Chamber HAST Test Chamber Thermal Vacuum Test Chamber Battery Explosion-proof Test Chamber battery test chamber Photovoltaic PV module UV test chamber Sunlight simulation test chamber Photovoltaic wet freezing test chamber Photovoltaic Dustproof Test Chamber
EN
中文
Pусский
Tiếng Việt
ภาษาไทย
پاکستانی زبان
