Search for the product you are looking for
Car Navigation Aging Room

Car Navigation Aging Room

Product Introduction
Car navigation aging room, the main simulation of a high-temperature, harsh environment testing equipment, is to improve product stability, reliability of the test equipment.

Service Hotline

+86 18017488690
Inquire Now Get A Quote
Product Parameter
Model Studio Size  (D*W*H)mm Dimension(D*W*H)mm
LRHS-8M-LG 2000×2000×2000 Subject to contractual three-view
LRHS-15M-LG 2500×3000×2000
LRHS-30M-LG 3000×5000×2000
LRHS-60M-LG 5000×6000×2000
temperature range RT+10℃~85℃/RT+10℃~150℃/ RT+10℃~200℃
Temperature uniformity ≤2℃ (at no load)
Temperature fluctuation ±0.5℃(at no load)
Time Setting Range 1~60000M
heating rate RT+10℃~85℃≤30min
Outer case material High-quality library board, CNC finishing
Inner box material Imported high-grade stainless steel SUS304
Insulation material Rigid polyurethane foam + fiberglass
Temperature Controller Imported “UEC” brand temperature and humidity meter
temperature sensor PT100 platinum resistance temperature measurement body
overtemperature protector Korea RAINBOW
Miniature Circuit Breaker Schneider France
standard configuration E-stop switch, three-color indicator light
security protection Over-temperature, fan motor overheating, overall equipment phase failure/reverse phase
Leakage protection, overall equipment timing, overload and short circuit protection
Supply Voltage AC380V±10% 50Hz
Power 15.0kW 20.5kW 28.0kW 35.0kW
operating environment 5℃~+28℃ ≤85% RH
Note:
1、the test data are used in the ambient temperature of 25 ℃ and well ventilated conditions measured
2、Can be customized according to the specific requirements of the user non-standard large-scale car navigation aging room etc
3、This technical information, subject to change without notice

 

Get A Quote
Name:*
Phone:*
Email:*
Your message information:
Product Recommendation
Industry News
When a company changes its production location and needs to relocate a thermal shock test chamber, the following precautions must be taken to minimize potential damage to the equipment.
The sand and dust test chamber is used to evaluate the sealing performance of factory-produced products by simulating the erosion caused by natural wind and sand climates.
There are significant differences between walk-in sand and dust test chamber and military standard sand and dust test chamber in many aspects.
Telegram WhatsApp Facebook VK LinkedIn